Sharp LC-60SQ15U Flickering Screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • boydsc
    Member
    • Jul 2018
    • 10
    • US
    #1

    Sharp LC-60SQ15U Flickering Screen

    Hello I have Sharp 60" with a flickering / pixelated screen. There are dark horizontal lines across the whole screen that slowly roll upwards. Is this a board problem or screen problem ? Is this a common problem with Sharp tv's ? I have reseated all the cables on the boards and all the screws are tight on the boards.
    Attached Files
    Tags: None
    • boydsc
      Member
      • Jul 2018
      • 10
      • US
      #2
      Re: Sharp LC-60SQ15U Flickering Screen

      Ok did some searching and read a couple threads about tab drivers and disconnecting t-con board ribbon cables. I will give it a shot see what happens.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Ado02
          Lenovo Thinkpad X1 Gen 10 - Flickering Screen
          by Ado02
          Hello everyone,

          We recently replaced the OLED screen on a Lenovo ThinkPad X1 Gen 10. After about a month, the replacement screen began to flicker. Initially, updating the Intel® Iris® Xe graphics driver resolved the issue for about a week. However, when the problem recurred, updating the driver again had no effect.

          The flickering only occurs once the system reaches the Windows login screen. Interestingly, if we disable the Intel GPU driver or connect the laptop to an external monitor, the flickering stops. We have tried installing two different replacement screens,...
          12-16-2024, 02:33 PM
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • EazyBone
          Sharp LC-65Q620U White Screen
          by EazyBone
          Another TV topic!!
          I got this sharp TV that when I first plugged it in it showed the sharp logo and then went to the input screen. This was about 30 seconds and then it showed white screen. Now I can't see anything but white screen. This has a separate TCON and Main.

          The TCON is getting 12V and several parts are as well but the VGH line is only .5Volts which I thought is totally incorrect.

          Am I on the correct assumption that the TCON is bad somehow if I'm only getting that voltage or is there something else I should check?...
          08-21-2024, 12:56 PM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • Mad_Science
          Sharp TFT-LCD Model No. LQ050Q5DR01 gray screen
          by Mad_Science
          I have a older eddy current tester made by Olympus that uses interchangeable TFT-LCD screens. I have two devices that each take the same removable screens. One is an Olympus NORTEC 200D+ and the other is an Olympus SONIC 1200M EMI. I have searched the internet high and low for service manuals for these units with no luck. Both these units were used extensively by the US military for NDT on airplanes. The detachable screen plugs into the base unit via a weird non standard VGA connector. Buttons on the removable display are used to power the units on. When the power button is pressed the unit makes...
          03-01-2024, 05:05 PM
        • Loading...
        • No more items.
        Working...