PN60F8500 Bad Power Board Shutting Off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • p1zaul
    New Member
    • Oct 2018
    • 3
    • USA

    #1

    PN60F8500 Bad Power Board Shutting Off

    I purchased a PN64F8500 used with an issue where it would not turn on and replaced three caps on the Y-Board and it was fixed and been working ever since.

    Few months later I see a PN60F8500 for sale on CL with a note saying it does not work, so figure the same easy fix and I'll have a new TV.

    The issue is slightly different, the TV will power on but after around 5 minutes or so it will power itself off and not turn back on.

    After opening up the back I notice the boards are completely different and those three caps from the 64 inch do not even exist on the 60 inch model.

    I have looked on various forums online and seems that this is an issue with the power board itself. The board is model BN44-00602A. I have replaced the main 4 large capacitors but still have same issue. Has anyone else had this issue? I have also read it is possible it is chopper transistor failing short circuit or the bridge rectifier failing short circuit. I am not even really sure what those components are. Is there a way to easily check the remaining caps on the power board to single out any that may be damaged?
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8352
    • Canada

    #2
    Re: PN60F8500 Bad Power Board Shutting Off

    could be also the main board doing that. Maybe run the TV with the back off and put a fan behind, in order to cool it. See what happens.

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9625
      • Canada

      #3
      Re: PN60F8500 Bad Power Board Shutting Off

      If something was shorting it would stay shorted and likely blow the main fuse, Remove the power supply and inspect and resolder the transformer rivit connections and also resolder any components that are mounted to heatsinks.

      Comment

      • p1zaul
        New Member
        • Oct 2018
        • 3
        • USA

        #4
        Re: PN60F8500 Bad Power Board Shutting Off

        would it actually turn on if the solder was failing?

        Comment

        • Andrew F. Ali
          Badcaps Legend
          • Jan 2014
          • 2450
          • Trinidad & Tobago

          #5
          Re: PN60F8500 Bad Power Board Shutting Off

          Yes it would and might shut down suddenly whilst working. Hence RJ suggested: 'Remove the power supply and inspect and resolder the transformer rivit connections and also resolder any components that are mounted to heatsinks.'

          Comment

          Related Topics

          Collapse

          • Soulzink
            Samsug washing machine. Power supply DC41-00189a board issue
            by Soulzink
            Hi everyone,

            I am trying to fix a samsung washinmachine power supply main board.
            I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
            Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
            The power supply board reference is the following: DC41-00189a
            I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
            04-19-2025, 06:26 AM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • Cooperr
            Samsung 59" plasma PN59D550C1F seeking advice on mystery power board issue
            by Cooperr
            I picked up this TV from Facebook Marketplace, original owner described it as "screen went black after a pop" and I hoped to see an obvious fuse or cap to replace. Doesn't seem to be the case, but my experience and electrical knowledge are kind of limited for this.

            The power board (BN44-00445A, see attached) turns on and Vs and Va seem to momentarily have power, then they steadily drain to zero over a minute or two as if they're only getting power from capacitors. I've been measuring Vs and Va from the test pads, with and without the other boards connected to the power board...
            10-21-2025, 01:11 PM
          • notallbad
            TCL 55RP620K power board issue
            by notallbad
            Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
            0% p_dim at 1.65v and a_dim at 1v
            50% p_dim at 3.3v and a_dim at 1.65v
            100% p_dim at 3.3v and a_dim at 2.88v

            Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

            Leds are 2 rows of 15 6v leds.

            On inspection of the power board found diode MBR3200 shorted so replaced with...
            07-12-2025, 05:45 AM
          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            10-28-2024, 05:06 PM
          • Loading...
          • No more items.
          Working...