Jvc lt-50e73

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • fester
    Senior Member
    • May 2017
    • 158
    • Slovakia
    #21
    Re: Jvc lt-50e73

    Exactly, desoldering flash chip,programming and soldering back. you can also sometimes find flashed chip for your tv on ebay or so

      Comment

      • mtoivanen
        New Member
        • Sep 2014
        • 9
        • Finland
        #22
        Re: Jvc lt-50e73

        Got myself a programmer, reflashed the firmware and sound works now!

          Comment

          • cabbansweden
            New Member
            • Jun 2023
            • 2
            • Sverige
            #23
            Re: Jvc lt-50e73

            Originally posted by mtoivanen
            Got myself a programmer, reflashed the firmware and sound works now!

            are you still active, i hope you can point me to the firmware cause i have same annoying af issue its making me angry no sound output wghat so ever or someone please help , would be so much apreciated if someone cant help, cant find zip file every where jvc not good to not have on website last hope this forum, or else i throw the tv in trash

              Comment

              • cabbansweden
                New Member
                • Jun 2023
                • 2
                • Sverige
                #24
                Re: Jvc lt-50e73

                also issue with buttons on remote not controling tv instead turing it off :P maybe a fw rweflash is fixing that steak to

                  Comment

                  • lotas
                    Badcaps Legend
                    • Jan 2016
                    • 4752
                    • Russia
                    #25
                    Re: Jvc lt-50e73

                    Originally posted by cabbansweden
                    are you still active, i hope you can point me to the firmware cause i have same annoying af issue its making me angry no sound output wghat so ever or someone please help , would be so much apreciated if someone cant help, cant find zip file every where jvc not good to not have on website last hope this forum, or else i throw the tv in trash
                    Do you have a programmer to overwrite spi flash W25Q64?

                      Comment

                      • fester
                        Senior Member
                        • May 2017
                        • 158
                        • Slovakia
                        #26
                        Re: Jvc lt-50e73

                        Originally posted by cabbansweden
                        are you still active, i hope you can point me to the firmware cause i have same annoying af issue its making me angry no sound output wghat so ever or someone please help , would be so much apreciated if someone cant help, cant find zip file every where jvc not good to not have on website last hope this forum, or else i throw the tv in trash
                        here it is
                        Attached Files

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • zoltor
                            Canon G3430 has a lightning flash after the firmware
                            by zoltor
                            Good afternoon. The Canon G3430 is lit by lightning after the firmware, it does not respond to the buttons. I did not flash it, they brought it with traces of soldering, and all three chips. SPI - IC401 25Q128, IC402 25Q32, IC403 M24128. The SPI flash drives may have been confused in places. The QM8-0985 formatter. I've tried all the firmware available on the Internet, and the result is the same. I ask you to send dumps of chips, if someone has the same revision of the board, also tell me if the location of the SPI flash corresponds to the position numbers. Thank you very much in advance.
                            09-17-2025, 12:40 AM
                          • corrize
                            Nikon D800 camera - flash don’t work and capacitor don’t charge
                            by corrize
                            Hello, I'm stuck in troubleshooting…
                            The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

                            In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
                            When I press the flash button, it's detected by the system, flash icon appear on LDC display....
                            10-01-2022, 10:02 AM
                          • TheUser
                            Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
                            by TheUser
                            Hello to everyone ,

                            This is my first post here, and i would like to share with you a small story in case you can help me.

                            Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

                            All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

                            I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
                            02-10-2024, 02:07 PM
                          • gurj1979
                            Ubiquiti firmware help. US-8-150W POE
                            by gurj1979
                            Hi guys.

                            I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
                            Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

                            So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
                            Got New chip and writes good.

                            THE PROBLEM...
                            It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

                            Does anyone have a Good Firmware I can have?...
                            07-22-2024, 05:13 PM
                          • ekozeko333
                            [Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V
                            by ekozeko333
                            Hi all,
                            I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
                            🔥 The Problem Started After Suspected ESD/PD Fault
                            I experienced a power issue or ESD event through a USB-C charger
                            After that, the NX20P5090 power switch was visibly burned and was replaced
                            Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
                            🧠 What I’ve Done So Far
                            Flashed...
                            06-21-2025, 02:48 AM
                          • Loading...
                          • No more items.
                          Working...