Mitsai 22VLM12 with blinking led (advice needed)

[jorpec]

Hello, I have this lcd tv when i power on the led never stop blinking and the tv does not turn on

I searched here and on other sites, the problem is the eeprom, if i freeze it works, so i'm thinking of remove the chip, then freeze it, and using a programmer read the data, and then copy to another chip

To do so i need a programmer, so i need advice about which programmer and software i should use, at ebay i saw a CH341A programmer, i dont know if is the right one for doing this, i also plan to use it on laptops bios chip, it would be great if it can read both lcd/tv and laptop eeprom chips

Thanks in advance

[vinceroger69]

Re: Mitsai 22VLM12 with blinking led (advice needed)

Their is a thread on this forum about the ch341a it also includes the software/drivers they are good programmers although i have not used it on laptop bios chips.

[ducky29]

Re: Mitsai 22VLM12 with blinking led (advice needed)

This is a firmware related problem. I read that CH341A does 25 series chips so its gonna be fine. Freezing the chip is not the proper way how you fix this kind of problem, so its gonna be a hit or miss.

[jorpec]

Re: Mitsai 22VLM12 with blinking led (advice needed)

Thanks for the reply's

I checked the ch341 thread, it seems it can program this eeprom, so i will order one from ebay, and i will try

[trata]

Re: Mitsai 22VLM12 with blinking led (advice needed)

amigo jorpec tens deste tv obrigado