LG 55uf7787 stuck on logo

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #21
    Re: LG 55uf7787 stuck on logo

    https://www.ebay.co.uk/itm/MKJ391708...kAAOSwMCdbdJip

    I think a Harmony would cost as much.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Dannyx
      CertifiedAxhole
      • Aug 2016
      • 3912
      • Romania

      #22
      Re: LG 55uf7787 stuck on logo

      A Harmony is actually more expensive, but on the plus side I can use it for other devices as well...thanks for the tip though.
      Wattevah...

      Comment

      • Diah
        Badcaps Legend
        • Feb 2013
        • 6364
        • Germany

        #23
        Re: LG 55uf7787 stuck on logo

        Originally posted by Dannyx
        A Harmony is actually more expensive, but on the plus side I can use it for other devices as well...thanks for the tip though.
        vinceroger69 drive you where you find the apk to use it on aandroid device with IR like samsung galaxy s5 and other.. or make one DIY IR Diode and play the wave file via PC..

        Originally posted by vinceroger69
        this thread maybe worth a read the software post 19
        https://www.badcaps.net/forum/showth...service+remote

        Comment

        • ducky29
          Badcaps Veteran
          • Dec 2015
          • 370
          • Europe

          #24
          Re: LG 55uf7787 stuck on logo

          Originally posted by Diah
          vinceroger69 drive you where you find the apk to use it on aandroid device with IR like samsung galaxy s5 and other.. or make one DIY IR Diode and play the wave file via PC..
          Lgs are widely spread so I think that getting a service remote control is a good investment rather than playing around with phones aux cables, wav files etc

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #25
            Re: LG 55uf7787 stuck on logo

            if this is the lg service remote its cheap enough i may get one at this price
            https://www.ebay.co.uk/itm/MKJ391708...V/273364766873

            Comment

            • ducky29
              Badcaps Veteran
              • Dec 2015
              • 370
              • Europe

              #26
              Re: LG 55uf7787 stuck on logo

              Originally posted by vinceroger69
              if this is the lg service remote its cheap enough i may get one at this price
              https://www.ebay.co.uk/itm/MKJ391708...V/273364766873
              Yes thats the one I use. I bought it at 30euros few years ago

              Comment

              Related Topics

              Collapse

              • x_orange90_x
                Vizio V555-G1 stuck on wallpaper; now stuck on V logo
                by x_orange90_x
                I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
                12-28-2023, 06:26 AM
              • G33RT
                Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                by G33RT
                Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                It does power up when pressing the power button.

                I already try the power button while plugin the plug with no result.
                Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                Could this be an PSU or eMMC issue ?
                07-19-2025, 03:43 AM
              • justice171
                JVC LT-50N795 Stuck on Wisdom Share Logo
                by justice171
                Hi everyone,

                I'm working on a JVC TV for a client that's stuck on the "Wisdom Share" logo screen.

                It's a model LT-50N795 with a board number TP.HV510.PC822. I attempted a firmware update via USB, and while the upgrade was completed successfully, the TV is still stuck on the Wisdom Share screen on reboot.

                Has anyone encountered this issue before, or does anyone have any suggestions on possible solutions?

                Thanks in advance!
                ​...
                11-04-2024, 02:55 AM
              • mr.Data
                Macbook A1990 stuck on logo
                by mr.Data
                Hello,

                This Macbook Pro 2018 boots up and then gets stuck on the logo.
                All the normal methods of resetting this Macbook have been tried but do not work.
                I cannot get into recovery mode and there is no bar displaying, it's just the white logo on a black background.

                Any help would be greatly appriciated....
                04-18-2024, 11:51 PM
              • platinumsteel
                Macbook Air 2015 Booting Very Slow and Stuck on apple Logo 99%
                by platinumsteel
                Hi guys i have my personal MacBook Pro 2015 820-00165 board that was working fine for more than a year and one day stopped working on my original Magsafe charger. It was turning on with my bench power supply. Opened it up and while diagnosing that somehow i ended up with a shorted smc.The line which was shorted was SMC_PM_G2_EN. I removed the SMC and short was gone. So all I had was another working donor board 820-3435 which i used to program it's SMC to 820-00165 using the SMCTOOL By MuertoGB.Took that SMC and use it on my 820-00165 board .And my board started working again. PPBUS_G3H 8.56V....
                03-18-2024, 05:16 PM
              • Loading...
              • No more items.
              Working...