Thank you all people help me
14times red light flash tell us is bad t-con or panel is not right so far
now I attached a picture I found the problem from the inverter board
Please take a look a picture
Attached Files
-
Re: sony kdl-46w5100 no red light standby, on green off red light flash 14 times
Thank you all people help me
14times red light flash tell us is bad t-con or panel is not right so far
now I attached a picture I found the problem from the inverter board
Please take a look a picture -
-
Re: sony kdl-46w5100 no red light standby, on green off red light flash 14 times
If you do have 12V on both ends of the fuse with ref, to GND. What happen if you remove the cables between T-CON and the LCD panel?
BTW, can we see the whole back side of the TV showing all the boards?Last edited by budm; 08-15-2018, 09:40 PM.Leave a comment:
-
-
-
-
Re: sony kdl-46w5100 no red light standby, on green off red light flash 14 times
Check for 12V on Tcon fuse.
https://www.badcaps.net/forum/showthread.php?t=66995Last edited by neilc6; 08-15-2018, 06:43 PM.Leave a comment:
-
Re: sony kdl-46w5100 no red light standby, on green off red light flash 14 times
Tcon most likely.Leave a comment:
-
sony kdl-46w5100 no red light standby, on green off red light flash 14 times
I need help any people know what wrong of my tv, please
1- As soon I plug into power no red led standby show front TV, check voltmeter has ST-By 3..3 v
2- As soon press power button green light on working but no backlight or sound then 5-10 second green light off by itself then
3- Red light on and flash 14 times stop then keep flash 14 times keep cycling
BUT one thing if as soon I plug tv to power the turn tv on then I use wire to connect pin st-by 3.3v to backlight pin then I see
Backlight working bright and logo tv sony show on screen then off after a 4-5 second, every time I do that backlight on
Please I need all people here to help and tell me what is wrong
Thank you
Attached FilesLast edited by mydang; 08-15-2018, 11:56 AM. -
-
Hi
Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.
Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.
The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.
I have already tried replacing all of the... -
Hi
Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.
Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.
The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.
I have already tried replacing all of the... -
Hi
I have an 820-2610-A motherboard that has no green light.
I have noticed is when I do a SMC reset the light on the Magsafe blinks.
From My understanding, the sys onewire circuit is responsible for the green light on the magsafe
The sys onewire circuit on this model and others is more involved
I was hoping if anyone knows about this and how it works, can reply and let me know
I know this is an old model but I am sure there are people who still works on these or knows about them
I get 1.1v on the C7771 capacitor and will replace... -
Hi guys,
I have this 2011 MBP - the company I was working for, bought it at the time for a project and gave it to me after that. Later on, I gave it to my daughter which used it for normal internet browsing and office apps. At some point the, now famous, AMD GPU issue hit this laptop as well. I disabled the use of the AMD GPU following some information I found at the time (the one that, at the end, one moved AMD kext drivers to a backup location). So the laptop was using the CPU graphics and it was ok for the said daily usage. I even replaced the drive with an SSD one and it was operating... -
Good Day.
I just replaced tcon on my sony kdl 65xg9505 and getting green amber leds blinking. all voltages are ok according to working sequence.
i downloaded firmware from sony and there is no .pkg fike.. after extracting it gives another file which contains multiple files like inf, payload.bin and 3, 4 other files. i just did that usb but did not worked. anyone knows anything how to do it..?
green amber blinking stops after while and then starts again. tv responds to remote control on off etc. before installing new tcon backlite was coming on without backlite...
Leave a comment: