LG42LC55 sound from main board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andrewblueboy
    Member
    • Feb 2017
    • 47
    • uk

    #21
    Re: LG42LC55 sound from main board

    Still no luck with this. cant seem to find one any were. Can these be taken apart so i could unwind it to make repair. if so how does this come apart. ive tried youtube but cant find the kind i have to dismantle.. Really need some help with this one..

    Thankyou

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9535
      • Canada

      #22
      Re: LG42LC55 sound from main board

      They can't be taken apart, if you found where it was broken, try adding another piece of wire to extend it, you said you could not get continuity when checking it but did you scrape away the varnish on the wire before trying to check it? are there any numbers on the transformer?

      Comment

      • andrewblueboy
        Member
        • Feb 2017
        • 47
        • uk

        #23
        Re: LG42LC55 sound from main board

        Originally posted by R_J
        They can't be taken apart, if you found where it was broken, try adding another piece of wire to extend it, you said you could not get continuity when checking it but did you scrape away the varnish on the wire before trying to check it? are there any numbers on the transformer?
        no i didnt remove the varnish

        number are SLI-002 ANY0714FC

        i give it ago cleaning the wire. theres not much to grab as it so small

        i shall let you know how i get on

        thankyou

        Comment

        • andrewblueboy
          Member
          • Feb 2017
          • 47
          • uk

          #24
          Re: LG42LC55 sound from main board

          think ive done more damadge than good as theres a couple of loose strands come way from that piece of coil

          Comment

          • andrewblueboy
            Member
            • Feb 2017
            • 47
            • uk

            #25
            Re: LG42LC55 sound from main board

            decided to get another board

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago

              #26
              Re: LG42LC55 sound from main board

              Originally posted by andrewblueboy
              decided to get another board
              Good choice.

              Comment

              Related Topics

              Collapse

              • ygorsan
                LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
                by ygorsan
                Hi everyone,




                I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







                🧩 Problem Summary:
                • The TV keeps scrolling through the menu or selecting items by itself.
                • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
                • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
                • I
                ...
                07-28-2025, 08:34 AM
              • JDC
                (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                by JDC
                ONN 100012588
                Issue: No Power, Then Rebooting After Main Board Change

                Short answer: replace main board and power board
                Technical answer: replace main board and Q306 & Q307 on power board.

                Long answer:

                TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                07-15-2022, 07:39 AM
              • m1ch43lzm
                HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                by m1ch43lzm
                Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                05-12-2025, 08:37 PM
              • cheeky2
                Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                by cheeky2
                I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                Obviously the same LVDS connector for the screen connection...
                05-25-2024, 03:27 AM
              • advant
                Driving a Sharp TCON/panel with a universal main board
                by advant
                This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                02-03-2020, 12:25 AM
              • Loading...
              • No more items.
              Working...