Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12272
    • U.S.

    #21
    Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

    Originally posted by kevinm34232
    Did not try yet, will try shortly. It's questionable if it will accept the USB drive without being able to power up.

    update:

    TV will not take firmware file automatically...
    .
    Last edited by nomoresonys; 05-16-2018, 09:03 PM.

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #22
      Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

      Service manual on post #2, if you look at PDF page 30 LVDS connector, there is pin called 'PANEL ERROR' pin.
      Your panel is Samsung so SLCD looks to be the one for your TV, you can verify the pin out.
      Last edited by budm; 05-16-2018, 10:32 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Andrew F. Ali
        Badcaps Legend
        • Jan 2014
        • 2450
        • Trinidad & Tobago

        #23
        Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

        So what do we have on a recap:
        1. TV switching on and staying on
        2. Backlight turn on and stay on
        3. All signals from the Main Bd. and voltages on PSU are present, except
        4. T-CON ON signal from Main Bd.

        If you connect the 3.3V to the T-CON ON wire on the PSU you would have to make sure and disconnect it from the Main Bd. You would have to cut to wire midway of the connectors to leave enough space to join it back up.
        Just leave it connected long enough to see if there is an image on the Screen/Panel.
        If you get an image, then the Main Bd. is faulty.

        Comment

        • kevinm34232
          Badcaps Legend
          • May 2012
          • 1884
          • USA

          #24
          Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

          TV does not turn on and stay on. Instantly 5 blink code.

          Comment

          • Andrew F. Ali
            Badcaps Legend
            • Jan 2014
            • 2450
            • Trinidad & Tobago

            #25
            Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

            OK. I am now thinking your Main Bd. is bad and you should look for a replacement board. I think.

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #26
              Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

              Originally posted by kevinm34232
              TV does not turn on and stay on. Instantly 5 blink code.
              Did you look at the 'PANEL ERROR' pin?
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • Andrew F. Ali
                Badcaps Legend
                • Jan 2014
                • 2450
                • Trinidad & Tobago

                #27
                Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                Your Main Bd. Nos. would be
                1-895-172-11
                (1P-011BJ00-4011)

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12272
                  • U.S.

                  #28
                  Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                  Faulty eeprom?

                  Comment

                  • nomoresonys
                    Badcaps Legend
                    • Jan 2013
                    • 12272
                    • U.S.

                    #29
                    Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                    Looks like you need to find out why there's no tcon on signal coming from mainboard, did you check everything on tcon with your meter?

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12272
                      • U.S.

                      #30
                      Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                      A schematic of the mainboard would help.

                      Comment

                      • Andrew F. Ali
                        Badcaps Legend
                        • Jan 2014
                        • 2450
                        • Trinidad & Tobago

                        #31
                        Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                        Originally posted by budm
                        Did you look at the 'PANEL ERROR' pin?
                        Did you follow up on this to see if there is any voltage at that pin?? Of course this would be with everything connected.

                        Comment

                        • budm
                          Badcaps Legend
                          • Feb 2010
                          • 40746
                          • USA

                          #32
                          Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                          Sorry about the schematic for the main board, this is the one I am referring to:
                          Attached Files
                          Never stop learning
                          Basic LCD TV and Monitor troubleshooting guides.
                          http://www.badcaps.net/forum/showthr...956#post305956

                          Voltage Regulator (LDO) testing:
                          http://www.badcaps.net/forum/showthr...999#post300999

                          Inverter testing using old CFL:
                          http://www.badcaps.net/forum/showthr...er+testing+cfl

                          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                          http://s807.photobucket.com/user/budm/library/

                          TV Factory reset codes listing:
                          http://www.badcaps.net/forum/showthread.php?t=24809

                          Comment

                          • kevinm34232
                            Badcaps Legend
                            • May 2012
                            • 1884
                            • USA

                            #33
                            Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                            Originally posted by budm
                            Did you look at the 'PANEL ERROR' pin?
                            I will check the that pin when I get home and follow up thank you..

                            Comment

                            • nomoresonys
                              Badcaps Legend
                              • Jan 2013
                              • 12272
                              • U.S.

                              #34
                              Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                              Page 13 in budm's service manual looks good, maybe you can trace the tcon on wire back to mainboard then follow the traces to where they go, did you check those two IC voltage regulators right by the connector and any fuses you might have?
                              Last edited by nomoresonys; 05-17-2018, 04:11 PM.

                              Comment

                              • nomoresonys
                                Badcaps Legend
                                • Jan 2013
                                • 12272
                                • U.S.

                                #35
                                Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                http://assets.shopjimmy.com/media/ca...M/IMG_1134.JPG pic. of mainboard.

                                Comment

                                • kevinm34232
                                  Badcaps Legend
                                  • May 2012
                                  • 1884
                                  • USA

                                  #36
                                  Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                  I had no luck when I searched for a main board the other day, it's gonna be one of those hard to find ones..

                                  But first let's determine if it's that board for sure.

                                  Comment

                                  • nomoresonys
                                    Badcaps Legend
                                    • Jan 2013
                                    • 12272
                                    • U.S.

                                    #37
                                    Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                    Originally posted by kevinm34232
                                    I had no luck when I searched for a main board the other day, it's gonna be one of those hard to find ones..

                                    But first let's determine if it's that board for sure.
                                    If I recall, the 40, 46 and 55 ex640 will all work.

                                    Comment

                                    • nomoresonys
                                      Badcaps Legend
                                      • Jan 2013
                                      • 12272
                                      • U.S.

                                      #38
                                      Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                      Ebay Hong Kong 110 U.S plus 10 shipping, might need to translate page, your right sold out about everywhere, saw one for 192 bucks but that's sick.

                                      Comment

                                      • kevinm34232
                                        Badcaps Legend
                                        • May 2012
                                        • 1884
                                        • USA

                                        #39
                                        Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                        Ya not spending that much on an older 46", not worth it.. thanks for looking though..


                                        Budm as for the PANEL ERR#:

                                        On initial plug in to AC and/or each time power button is pressed, pin goes to 0.872V, then drops quickly back to 0V.

                                        The same thing happens if I disconnect CN4002 (the other LVDS connector), or either one or both of the ribbons going to the panel.

                                        With the T-Con completely disconnected from main board, PANEL ERR# goes to 3.3V immediately.

                                        Not sure what to make of that voltage reading whether it should be low or high..

                                        I tried grounding out the 3.3V PANEL ERR# pin with the T-Con disconnected, same 5 blinks.
                                        Last edited by kevinm34232; 05-17-2018, 07:17 PM.

                                        Comment

                                        • budm
                                          Badcaps Legend
                                          • Feb 2010
                                          • 40746
                                          • USA

                                          #40
                                          Re: Sony KDL-46EX640 won't turn on, 5 blinks on standby light.

                                          Well at least you did try to trick the ERROR pin signal but still get the same 5-error code. I am not sure at this point if you have T-CON or main board problem.
                                          Never stop learning
                                          Basic LCD TV and Monitor troubleshooting guides.
                                          http://www.badcaps.net/forum/showthr...956#post305956

                                          Voltage Regulator (LDO) testing:
                                          http://www.badcaps.net/forum/showthr...999#post300999

                                          Inverter testing using old CFL:
                                          http://www.badcaps.net/forum/showthr...er+testing+cfl

                                          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                          http://s807.photobucket.com/user/budm/library/

                                          TV Factory reset codes listing:
                                          http://www.badcaps.net/forum/showthread.php?t=24809

                                          Comment

                                          Related Topics

                                          Collapse

                                          • brithepi2k
                                            Sony KD-65XE8596 no standby light
                                            by brithepi2k
                                            Hi,

                                            I’ve got a Sony KD-65XE8596 here that has no standby light coming on. I’ve tested the power board with the test meter, the TV needs 3.4 for the standby but only getting 2.4. Anything that I can change/check on the board to get it working? Pictures of the board are included.

                                            cheers...
                                            09-06-2025, 02:22 PM
                                          • iglitare
                                            Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
                                            by iglitare
                                            Hi,

                                            i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
                                            Backlight seems to work, Sound (Setup menu after reset) works.
                                            If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
                                            Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
                                            With my small knowledge i would think at least the cables are good.

                                            Can this happen because of a bad tcon board?
                                            Or is it always a bad/shorted...
                                            09-04-2025, 07:13 AM
                                          • kca
                                            LG 82UN8570AUD ~ TCON or PANEL?
                                            by kca
                                            Hello all ~

                                            Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

                                            When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

                                            I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
                                            08-31-2025, 06:38 AM
                                          • thelankanguy
                                            Sony KD-55X9000F TCON Issue
                                            by thelankanguy
                                            The TV shows a black screen with no image.
                                            TCON ribbon connectors were disconnected individually for image and there was no half image even.
                                            Later both ribbons were disconnected and TCON voltages were tested.
                                            12V, 3.3V, 1.8V were seen present but VONE signal reads 0V.
                                            There is also a short to ground in this circled inductor.
                                            Is this a TCON issue or something else ?...
                                            12-13-2024, 12:27 AM
                                          • GoodCapDude
                                            Sony XBR-75X940E intermittent 6 blinks error code
                                            by GoodCapDude
                                            Hi everyone. First post on Badcaps!

                                            I am trying to fix a Sony 940E from 2017 that either starts normally (and works perfectly until turned off) or goes straight to the 6 blinks error code without showing anything on the screen. It is frustrating to know that it can still work perfectly but is barely usable because of the difficulty starting it up. I am willing to try to short the BL_ERR but I would like to avoid that if possible. Does anyone have a view on this? Thanks a lot....
                                            09-20-2025, 06:07 AM
                                          • Loading...
                                          • No more items.
                                          Working...