SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GR3Y5H3ART
    Senior Member
    • Jan 2011
    • 146

    #1

    SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

    hey guys, long time!

    i replaced the Power Supply Board as it had a few bulging caps


    tried to replace Main Board next but replacement was a dud


    whats weird is the picture will shake but if i tilt it back and forth or after about 20 mins. it goes away, any ideas what i should replace next?

    thanks in advance for any help
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #2
    Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

    possible tab bond issue?

    Comment

    • GR3Y5H3ART
      Senior Member
      • Jan 2011
      • 146

      #3
      Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

      is it something i could solve by replacing a Board rather than taking the whole thing apart?

      thanks for your help

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk

        #4
        Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

        maybe budm will have a idea what can cause the shaking but if you have a search on you tube regarding tab bond fix you will see whats involved this is only a guess that it maybe a tab bond fault hopefully a more experienced member will advise.

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

          Can we see what the shaking looks like?
          See pdf.
          Like this?
          https://www.badcaps.net/forum/showth...ht=tab+bonding
          Attached Files
          Last edited by budm; 03-14-2018, 12:27 AM.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • GR3Y5H3ART
            Senior Member
            • Jan 2011
            • 146

            #6
            Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

            hi budm! thanks for your help. it is doing what is in the .pdf

            i took the easy route and just got another TV, we needed an upgrade


            this Site has been super helpful so if anyone in Colorado...in Denver area wants it, you can have it for free

            i will also ship the parts i.e. Boards if you cover shipping


            i will list it here for one week, then post it in the Free Section on Craigslist and i'm sure someone could use it.


            the 2 main problems:

            it is doing the shaky picture in the corner but goes away and plays fine after 20-30 min.

            there is one vertical line less than 2mm wide on far right side, doesn't stick out too much like if it was something in the middle or a horizontal line

            other than that, hopefully someone can use it on here


            old Samsung model is the one in the front:




            Last edited by GR3Y5H3ART; 03-16-2018, 01:34 PM.

            Comment

            • GR3Y5H3ART
              Senior Member
              • Jan 2011
              • 146

              #7
              Re: SAMSUNG LNT5271FX still shakes after replacing Power Supply Board

              TVs gone to a good home

              Comment

              Related Topics

              Collapse

              • Document Archive
                Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                by Document Archive
                This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                09-07-2024, 05:50 AM
              • cheeky2
                Samsung BN44-00262A H37F1-9SS power supply help finding blown value components!
                by cheeky2
                This Samsung combined power supply and inverter was replaced a while ago from a Samsung 37inch LE37B530P7W TV. However I would like to repair this one.
                I have replaced the Mosfets Q1820 and Q1821 ( FDPF7N50U) which were both blown and the fuse FM802S. The schematic for this power supply that is attached doesn't relate to this power supply as the driving transistors and diodes are D1830, D1831, D1832, D1833, Q1811 & Q1810 are nowhere on the schematic!
                Does anyone know what the components for D1830, D1831, D1832, D1833, Q1811 & Q1810 should be? I ask as I did change the Mosfets...
                06-15-2025, 05:12 AM
              • sam_sam_sam
                Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                by sam_sam_sam
                I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                03-31-2024, 02:12 PM
              • MtnManMike
                Samsung UN75J6300AFXZA LCD TV Power Supply Troubleshooting
                by MtnManMike
                Hello,

                I'm hoping to get some help figuring out how to troubleshoot this power supply board. The television is a Samsung UN75J6300AFXZA, version no. UH03. The power supply board has two model numbers on it, L75S1 and BN44-00723C. As far as experience level, I'm familiar with recapping boards in terms of safely going through the soldering motions, choosing suitable replacement parts, and so forth, but as far as understanding the various functions of each part of these TV power supply boards, I am a rank beginner.

                When I plug the TV in, the screen flashes on and off and...
                07-23-2022, 06:43 PM
              • lp20th
                Samsung Plasma TV Power Supply Issue
                by lp20th
                I have a vintage 2008 Samsung 50” Plasma TV, Model code PN50A550S1FXZA with a power supply part number BN44-00222A. I repaired the power supply board several years ago finding a couple of cold solder joints on the back side of the board and it's worked great up until now. Recently a fried sound occurred with the smell of burnt electronics and the TV shut down. Trying to turn it back on yielded the typical relay clicking with no TV boot up. Upon investigation, removing feeds to the other boards within the TV it was found that disconnecting the logic board from the power supply allowed the...
                11-28-2023, 10:28 AM
              • Loading...
              • No more items.
              Working...