How to Change leds in a rca LED55C55R120Q

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tech 57
    Member
    • Aug 2014
    • 37
    • United States
    #1

    How to Change leds in a rca LED55C55R120Q

    Hello i am working on a rca Model Led55C55R120q
    Has anyone ever changed leds in this model.
    I need disassembly instructions don't want to crack the screen.
    i know the rca 65inch you pull the back right off panel face down this one not sure.most panels i worked on the bezel comes off the front.
    Thank you
    Tags: None
    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA
      #2
      Re: How to Change leds in a rca LED55C55R120Q

      This models tricky is a lot of stuff attached to the speaker cover assemblies. The plastic that surrounds the speaker assy pops off the back and alot of mounting hardware theree if I remember the LCD panel if standing upright could fall forward. This is a prime example of cheaply made displays.

      There is no metal framing on this TV. The plastic bezel holds the LCD panel and the diffusers in place.


      Love your avatar by the way I still work on tube type equipment and old console TV's. Restored an RCA CTC-10 not.too long ago.
      Last edited by freakaftr8; 03-08-2018, 01:03 PM.
      Did I leave the soldering iron on?

        Comment

        • Tech 57
          Member
          • Aug 2014
          • 37
          • United States
          #3
          Re: How to Change leds in a rca LED55C55R120Q

          Thank you

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago
              #4
              Re: How to Change leds in a rca LED55C55R120Q

              Love your avatar by the way I still work on tube type equipment and old console TV's. Restored an RCA CTC-10 not.too long ago.[/QUOTE]

              Really like it, too.

                Comment

                • Tech 57
                  Member
                  • Aug 2014
                  • 37
                  • United States
                  #5
                  Re: How to Change leds in a rca LED55C55R120Q

                  guess no one has the answer
                  i figured it out myself

                    Comment

                    • freakaftr8
                      Badcaps Legend
                      • Oct 2012
                      • 3743
                      • USA
                      #6
                      Re: How to Change leds in a rca LED55C55R120Q

                      That good. Sorry couldn't be more help. The one I performed LED strips on was a 65 inch RCA LED65G55R120Q last year. It was half disassembled when I got it for repair. I sent it back to him the same way
                      Did I leave the soldering iron on?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Verlengsnoer
                          Bios splash/logo change
                          by Verlengsnoer
                          Hi all,

                          at firs, i hope this is the right place to post my question.

                          Im looking for a tool to change the bios logo.

                          everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

                          i know that HP has a build in option to change the splash logo.

                          but i want to change the manufacturer logo to an own logo.

                          I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
                          ...
                          10-28-2022, 09:52 AM
                        • Pipolups
                          Corsair K70 LUX RGB dying LEDs
                          by Pipolups
                          Hi there !

                          I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
                          Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...
                          10-08-2024, 11:58 AM
                        • notallbad
                          TCL 55RP620K power board issue
                          by notallbad
                          Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
                          0% p_dim at 1.65v and a_dim at 1v
                          50% p_dim at 3.3v and a_dim at 1.65v
                          100% p_dim at 3.3v and a_dim at 2.88v

                          Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

                          Leds are 2 rows of 15 6v leds.

                          On inspection of the power board found diode MBR3200 shorted so replaced with...
                          6 Photos
                          07-12-2025, 05:45 AM
                        • rustinjust
                          Advice needed-Technika 32-207 works but sticks on channel,won’t change channels ok
                          by rustinjust
                          My tv will work for a while and change channels with the remote as it should but then it will stick on one channel only and work ok but it won't change channels. I have tried unplugging it for hours and whilst unplugged pressing the power button on the tv to reset it.

                          The volume button on the remote still works but it just won't change channels once it decides to stick on one channel

                          It has built in basic freeview tv here in the uk, I've tried doing an automatic search to reset the tv but nothing works.

                          I have to turn the tv off and then on again with...
                          09-28-2023, 12:23 PM
                        • VitalComputing
                          Replacing Mode Indicator LEDs
                          by VitalComputing
                          Hi all,

                          I have what should be a simple job but is causing me issues. There are three LEDs (yellow, green and red) on the indicator panel of a solar PWM controller and these have broken off. I need to replace them but I am unsure of the voltage drop across these. I don't want to replace with random LEDs in case they blow.

                          I took one of the LEDs out of circuit, put 19V across it with a 500 ohm resistor in series and there is a drop of about 13V across the LED, and this seems to increase as I increase the input voltage.

                          I thought I could just put a resistor...
                          09-17-2023, 04:43 PM
                        • Loading...
                        • No more items.
                        Working...