Pioneer pro 800HDI plasma tv powers on and off immediately

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1504
    • united states of america usa
    #21
    Re: Pioneer pro 800HDI plasma tv powers on and off immediately

    I do have one question

    What is the benefit of a plasma monitor vs a plasma tv?

    What is good about this model ( if anything is actually good) plasma pioneer pro-800hdi as compared to a standard plasma tv?

      Comment

      • shelby5041
        Badcaps Legend
        • Feb 2009
        • 1504
        • united states of america usa
        #22
        Re: Pioneer pro 800HDI plasma tv powers on and off immediately

        This plasma has all kinds of connections im not familiar with and it has speaker output connectors that go directly to standard speakers via speaker wire which is not normal on tvs nowadays

          Comment

          • shelby5041
            Badcaps Legend
            • Feb 2009
            • 1504
            • united states of america usa
            #23
            Re: Pioneer pro 800HDI plasma tv powers on and off immediately

            Damn just found out this plasma retailed dor $12,000 usd back in 2004 .....wow

              Comment

              • R_J
                Badcaps Legend
                • Jun 2012
                • 9516
                • Canada
                #24
                Re: Pioneer pro 800HDI plasma tv powers on and off immediately

                Thats why there are not many around, most people bought the much cheaper and usually larger screen brands.

                  Comment

                  • shelby5041
                    Badcaps Legend
                    • Feb 2009
                    • 1504
                    • united states of america usa
                    #25
                    Re: Pioneer pro 800HDI plasma tv powers on and off immediately

                    Well is there anything special or unique about this model plasma or not really?

                    Is it sellable ?

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • pixelcap
                        Pioneer Plasma 111FD To Solder or Not to Solder.
                        by pixelcap
                        Hello out there in Badcap land.

                        I have a Pioneer plasma that gave me the dreaded 8 red blink and shutdown, I have been trying to trace the failure points. On my last inspection while replacing a Y Sustain Board I noticed on the original and replacement board some missing solder, the points of connection
                        are from the Digital Address Board and the Buffer Boards. I have included the pictures, should I resolder these points or are they unsoldered intentionally? Any help would be much appreciated.

                        Thank you

                        Pixelcap...
                        03-08-2025, 07:10 PM
                      • KYBOSH
                        Trying to Save - LG 60PH6700 60-inch plasma HDTV - Powers ON but no picture
                        by KYBOSH
                        Saved this beast from the landfill this weekend.
                        Manfactured July 2013 in Mexico.

                        I love working on plasma TVs.
                        Its been a while but I was lucky enough to find 2 this week.

                        The TV powers on and stays on but no picture. Havent checked for sound yet.
                        No bulging caps although the insides are pretty dusty and the boards are discolored from many years of high heat.
                        Will start troubleshooting tonight.

                        ...
                        10-17-2024, 01:17 PM
                      • canadaboy25
                        Hitachi 55HDX99 Plasma Powers on but no picture
                        by canadaboy25
                        Hey guys, I recently acquired a Hitachi 55HDX99 plasma TV that doesn't work. The TV powers on and eventually goes into standby which is indicated by the blue power led changing to orange. If I plug a VCR into it to keep it awake, I can feed an audio source in and it will play the sound no problem. The volume controls on the TV work as well so it is obviously just a display problem.

                        I found the Hitachi service manual online which is also hosted on tom66's manual archive. Compared to the Panasonic service manual I had for the last plasma I worked on, this one is underwhelming to say...
                        03-22-2019, 12:06 AM
                      • Bushcat
                        Pioneer PL-X9 motor speed control wobble
                        by Bushcat
                        I'm starting to re-cap a Pioneer PL-X9 turntable, specifically the motor control board, because although everything tests out OK according to the service manual, the speed wavers slightly despite the quartz lock light remaining on. So, I've decided to re-cap that board since it's the cheapest next step...

                        Pioneer's passive component naming convention is clear to me. For example, CSZA R22M 35 is tantalum, radial leads, 0.22uF, 20%, 35V.

                        BUT there are two capacitors on the board which have actual Pioneer part numbers: PCL-042. I can tell they are 0.1uF, 16V but don't...
                        05-24-2023, 03:36 AM
                      • malogro
                        Acer Nitro 5 AN515-55-55M1 [GH51G mb] powers on, no vcc_core
                        by malogro
                        Hello all,

                        I'm stumped on this guy, so wanted to see if anyone has any further ideas:

                        Intro:

                        This is an Acer Nitro 5 AN515-55-55M1 with unknown prior history (bought "as-is" on eBay). It charges the battery and powers on from both AC adapter and battery, so I think this rules out main power issues.

                        Upon attempt to boot, it will "reboot" (meaning powers down and then powers on again) only once, and then stays stuck in a status of lights on / no post / no monitor. Powering on with fn+esc maxes out the fans on first boot attempt,...
                        04-14-2023, 04:44 PM
                      • Loading...
                      • No more items.
                      Working...