KDL-40s4100 Vertical T-con or main? (images)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rustytierod
    Senior Member
    • Sep 2014
    • 81
    • USA
    #1

    KDL-40s4100 Vertical T-con or main? (images)

    This bar changes colors between green and blue, flickering intermittently.

    I don't believe it's tab bonding because if I "twist" the screen on both sides there is no change and when I disconnect the LVDS cable the problem goes away immediately.

    Any thoughts?

    Last edited by rustytierod; 11-19-2017, 10:19 PM.
    Tags: None
    • rustytierod
      Senior Member
      • Sep 2014
      • 81
      • USA
      #2
      Re: KDL-40s4100 Vertical T-con or main? (images)

      Could it be the main board?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • Daren87
          Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
          by Daren87
          Hello everyone,

          I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
          08-13-2023, 03:25 PM
        • cheeky2
          Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
          by cheeky2
          I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
          Obviously the same LVDS connector for the screen connection...
          05-25-2024, 03:27 AM
        • Dani_2024
          Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
          by Dani_2024
          Hi and thanks in advance for any input you might provide!
          I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
          Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

          Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
          5 Photos
          10-28-2024, 05:06 PM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • Loading...
        • No more items.
        Working...