Toshiba 46xv540ou

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • erj7
    Member
    • Nov 2017
    • 10
    • United States

    #1

    Toshiba 46xv540ou

    First post!

    Problem: Startup and operation are fine until about 5-15 minutes. Screen goes black but power remains (audio cuts as well). Power cycling restores the video until about 5-15 minutes.

    I was told that I should look for bad capacitors on the power board. I've identified no obviously bad capacitors, but I would like people's help.

    Attached are some hi-res pictures I took of the power board, front and back.

    Thanks in advance
    Attached Files
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8146
    • Canada

    #2
    Re: Toshiba 46xv540ou

    We need high resolution, straight shot pictures of the boards.

    To me it sounds like you have a main board problem, not a PSU problem. On pic# 1 on the left there is this connector that goes to the main board. Turn the TV on and note down pin name and the DC voltage measured. Same thing again when the TV "acted up". Post that here.

    Just for reference: Only because a capacitor "looks" like new, it still can be bad. I just had a few examples of that last week. The best way to check the health of a capacitor is with an ESR meter.

    BTW: I think the model number of this TV is: 46xv540u
    Last edited by CapLeaker; 11-04-2017, 06:11 AM.

    Comment

    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago

      #3
      Re: Toshiba 46xv540ou

      I encountered another TOSHIBA LED TV with similar issue that Model was a 55SL412U. The PSU was PK101V2510. I at first thought Main Bd. However while poking around I short cct something and toasted the PSU. I believe I was losing the 24V on the PSU. I bought a new PSU to start over the troubleshooting and to my surprise the TV worked and as far as I know is still working.

      Comment

      • dskall
        Badcaps Legend
        • Oct 2016
        • 2905
        • usa

        #4
        Re: Toshiba 46xv540ou

        Also Need voltages from connector that goes from power supply board to main board. Will need pin#- PIN DESCRIPTION -Pin voltage in standby-Pin voltage when pushing power button and picture of connector on power supply board.
        Format:
        Pin# - Pin Description - Pin Voltage standby - Pin voltage power on
        1 - XXXXXXX - XXv - XXXv
        2 - XXXXXXX - XXXv - XXXv
        3 - XXXXXXX - XXXv - XXXv
        4 - etc.
        Also dcv across one of C1 main caps while tv is on
        Last edited by dskall; 11-04-2017, 11:54 AM.
        I assume no responsibility for any stupid suggestions I might post.

        Comment

        • erj7
          Member
          • Nov 2017
          • 10
          • United States

          #5
          Re: Toshiba 46xv540ou

          Pin No. - Description (from Board) - DCV standby (V) - DCV On (V)
          --------------------------------------------------------------------
          1,2 - GND - 0.0000 - 0.0000
          3,4 - 12VA - 0.0300 - 11.842
          5-7 - GND - 0.0000 - 0.0000
          8,9 - 12VCC - 0.0300 - 11.842
          10-12 - 5VCC - 5.0000 - 5.0360
          13 - POWN - 0.0000 - 3.2975
          14 - ACD - 3.3620 - 3.361
          15 - DIM - 0.0082 - 0.2530
          16 - BLON - 0.0000 - 3.2851

          C1 while ON: 162.21V
          Attached Files

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: Toshiba 46xv540ou

            ":15 - DIM - 0.0082 - 0.2530" Recheck this dim control Voltage when the backlights are on, 0.25V is too low for the backlights to be on.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • erj7
              Member
              • Nov 2017
              • 10
              • United States

              #7
              Re: Toshiba 46xv540ou

              Guys..

              First of all thanks for diving in. Secondly I think I may have shorted the power board after doing this...

              Originally posted by budm
              ":15 - DIM - 0.0082 - 0.2530" Recheck this dim control Voltage when the backlights are on, 0.25V is too low for the backlights to be on.
              Before getting that reading, since the TV was upside down I went to check one of the C1 capacitors on the power board to see if the backlights were on. POP. The TV now refuses to turn. Some minimal burn on one of the C1 leads but the capacitor still holds 162DCV when plugged in.

              This just got more interesting. Where should I head to first so the TV can turn back on and we can get back to square one?

              Thanks in advance

              Comment

              • dskall
                Badcaps Legend
                • Oct 2016
                • 2905
                • usa

                #8
                Re: Toshiba 46xv540ou

                Recheck your voltages
                I assume no responsibility for any stupid suggestions I might post.

                Comment

                • CapLeaker
                  Leaking Member
                  • Dec 2014
                  • 8146
                  • Canada

                  #9
                  Re: Toshiba 46xv540ou

                  you have to fix the PSU first.

                  Comment

                  • erj7
                    Member
                    • Nov 2017
                    • 10
                    • United States

                    #10
                    Re: Toshiba 46xv540ou

                    Just a blown fuse.

                    The Dim pin reads .25 when the backlights are on. Any thoughts? Inverter circuit?

                    Comment

                    • CapLeaker
                      Leaking Member
                      • Dec 2014
                      • 8146
                      • Canada

                      #11
                      Re: Toshiba 46xv540ou

                      well... for shits and giggles, take the DIM pin off (so you don't backfeed), jump BLon to the DIM pin.

                      Comment

                      • erj7
                        Member
                        • Nov 2017
                        • 10
                        • United States

                        #12
                        Re: Toshiba 46xv540ou

                        Thanks, I'll do that tomorrow after work. I've talked to a couple techs at the company I work at (I took the TV in and plopped it in the lab), they've seen the problem and conclude it's probably a logic board issue. They say it's likely not worth the effort getting it fixed, just buy a new board.

                        Unfortunately, I'm having trouble finding a replacement logic board for the 46xv540u. The boards that I find do not physically match the layout that I see on the TV.. (example: https://www.ebay.com/itm/Toshiba-46X...IAAOSwcUBYJfhV)

                        Where's a good place I can look for replacement boards?

                        Comment

                        • jetadm123
                          Badcaps Legend
                          • Feb 2010
                          • 2169

                          #13
                          Re: Toshiba 46xv540ou

                          Originally posted by erj7
                          Where's a good place I can look for replacement boards?
                          You can try shopjimmy.com

                          Comment

                          Related Topics

                          Collapse

                          • Tynan Dill
                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                            by Tynan Dill
                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                            Upon bringing it home and plugging it up, it showed a standby light.

                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                            Assuming...
                            11-22-2024, 01:46 PM
                          • m1ch43lzm
                            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                            by m1ch43lzm
                            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                            05-12-2025, 08:37 PM
                          • howardc64
                            TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                            by howardc64
                            All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                            • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                            • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                            ...
                            07-24-2025, 05:17 PM
                          • Document Archive
                            Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
                            by Document Archive
                            This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                            09-06-2024, 05:27 AM
                          • atltechnology
                            Toshiba Satellite L50 PSKXWA-01100M Schematic Diagram Board View
                            by atltechnology
                            I need the Toshiba Satellite L50 PSKXWA-01100M

                            This is my board no : daobltmb8fo rev f
                            model no : Toshiba L50D-C
                            Part no : PSKXWA-01100M
                            Give me Schematic Diagram Board View
                            01-14-2025, 04:21 AM
                          • Loading...
                          • No more items.
                          Working...