So originally though I had some bad solder joints on the backlight strips in this tv. But after tearing it down and testing them I found out that wasn't the issue. So After I got it all back together and started cleaning the Panel the backlight popped on. I took my hand off the screen and it went out.
I quickly discovered that if I pushed on the top of the TV the backlight would come on. So what in the world is going on here. I can see the PS board flex as I push the top of the TV. I have inspected the solder joints under microscope and don't see any cracks or damage anywhere. Any ideas?
I quickly discovered that if I pushed on the top of the TV the backlight would come on. So what in the world is going on here. I can see the PS board flex as I push the top of the TV. I have inspected the solder joints under microscope and don't see any cracks or damage anywhere. Any ideas?
Comment