PSU tv haier led 42" dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • manounours
    Member
    • Apr 2013
    • 12
    • france
    #1

    PSU tv haier led 42" dead

    Hello,

    i'm french technician and i have a tv led haier model LE42D10HF with PSU dead

    PSU Model : LK-OP418003B

    I found F1 blow, Q3 and Q10 c/c

    I think my psu controller IC1 is dead too but i can't read the type. only letter "EBH"

    If anyone have service manual, schéma or ic type, i will be happy.

    Thank you all

    Emmanuel
    Tags: None
    • manounours
      Member
      • Apr 2013
      • 12
      • france
      #2
      Re: PSU tv haier led 42" dead

      hello,

      il seems to be "FAN7930"

      Can anyone confirm that ?

      Thanks you

        Comment

        • maxvalutech
          Badcaps Veteran
          • Dec 2014
          • 804
          • australia
          #3
          Re: PSU tv haier led 42" dead

          Try elektrotanya.com for manual.

            Comment

            • manounours
              Member
              • Apr 2013
              • 12
              • france
              #4
              Re: PSU tv haier led 42" dead

              Hello,

              i've try your website but not find my tv

              Emmanuel

                Comment

                Previous template Next

                Related Topics

                Collapse
                • djaywilly
                  Haier TV Not Turning On--Completely Dead with No standby light
                  by djaywilly
                  I have a Haier 50" LE50d3505b television that is "dead." No image, no standby lights, no sound, no nothing. The power supply board is HKL-500201A, and physical inspection looks good. I have tested the fuse (works) and the bridge rectifier (works). Also, the capacitors are not "puffy." However, a couple diodes seem to have faulty test results. I have tested diodes 10/11 using the "diode setting" on my multi-meter. I got .000 readings for both. For diodes 13/14, I got .177 for both readings. Do you think just these diodes are the issue? If so....would these be...
                  05-24-2021, 10:56 PM
                • double_DD
                  How can I be sure that my EC chip is dead?
                  by double_DD
                  Hi all,

                  As the title suggests, how can I be sure that my EC chip is really dead?

                  I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

                  Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
                  03-12-2025, 07:47 AM
                • disorder
                  ps5 edm-033 dead after hdmi/usb ports destroyed
                  by disorder
                  hello guys,

                  i need help to repair a edm-033 ps2
                  history : as always hdmi port and usb ports destroyed after unplugged
                  after change them, ps5 dead too : 1 beep, no blue light. after inspection 1.8v power was shorted, and because of dead panasonic chip. after remove it : no short anymore
                  so i changed it
                  now i have got 5v stby,, 3.3v stby, 3.3v power, 1.8v power and no short on them
                  but the ps5 is dead again : 1 beep, near 10 seconds with power lines and then off, no blue light ...

                  i don't see any projection of liquid metal on pcb.
                  ...
                  01-14-2025, 12:48 PM
                • zunasthegreat
                  Chieftec GPS-450-AA with dead 20N60C3
                  by zunasthegreat
                  Hello everyone hope all doing well!
                  I have this PSU (GPS450-AA delta oem) around for like 4-5 years and I had it recapped early 2020 or 2021 with mostly UCC KY and Nichicon PW's. The bulk was and still is fine, the original Ltec's were bloated and empty. The previous issue was some major coil whine noise and at times random shutdowns when going idle. Today it started tripping the mains breaker and I think I have dead APFC mosfets (20N60C3). Right now upon checking I have the Q1 and Q3 FETs dead so far and I guess those are responsible for the PFC circuit. The only thing I care is If there...
                  3 Photos
                  09-01-2024, 07:12 PM
                • Beton
                  Finding a dead short component
                  by Beton
                  Hi guys!
                  I searched for the term "dead short" in the forum but no specific thread came up however if I'm just blind and couldn't see the thread talking about this please forward me to that direction.
                  So my problem is I don't know how to find the source of a dead shorted voltage rail. Dead short = ~0 ohm resistance.
                  I have two VGAs (HD 4850 and HD 4870), both dead shorted to ground on the memory rail. I have the boardview file for the 4870 and the memory rail consists around ~7892346 capacitors...
                  I have a bench PSU and if I try to inject voltage the voltage...
                  12-10-2021, 01:05 PM
                • Loading...
                • No more items.
                Working...