Re: Haier TV Not Turning On--Completely Dead with No standby light

So I am not experienced enough to solder. I also do not have the necessary equipment. I was thinking about just replacing the entire power supply board. Would this be the correct one to replace it with?
[url]https://partstore.encompass.com/item/10179415/Haier/6007460228/[/url]Re: Haier TV Not Turning On--Complet... supply board.

Re: Haier TV Not Turning On--Completely Dead with No standby light

R_J: I checked the DC voltages for JP1 5VSB. It jumps between 1.2 and 1.4V
STB measured 0V

Re: Haier TV Not Turning On--Completely Dead with No standby light

I meant to include this in the initial post. I am getting no 5V standby voltage to mainboard.

I have a Haier 50" LE50d3505b television that is "dead." No image, no standby lights, no sound, no nothing. The power supply board is HKL-500201A, and physical inspection looks good. I have tested the fuse (works) and the bridge rectifier (works). Also, the capacitors are not "puffy." However, a couple diodes seem to have faulty test results. I have tested diodes 10/11 using the "diode setting" on my multi-meter. I got .000 readings for both. For diodes 13/14, I got .177 for both readings. Do you think just these diodes are the issue? If so....would these be...

Re: Hkl-480201b hkl-500201b hkl-550201b psb repair

pic...

Re: Hkl-480201b hkl-500201b hkl-550201b psb repair

I have a Haier 50" LE50d3505b television that is "dead." No image, no standby lights, no sound, no nothing. The power supply board is HKL-500201A.
I have tested diodes 10/11 using the "diode setting" on my multi-meter. I got .000 readings for both. For diodes 13/14, I got .177 for both readings.
Do you think diodes 10/11 are the issue and to replace them? If so....would these be the correct diodes to replace them with: [url]https://www.ebay.com/itm/113767298971?hash=item1a7d0f379b:g:B-QAAOSwDw9bLDvU[/url]...

Re: New Members - please post your introductions here

Hello my name is john wilson. Just trying to learn how to repair my tv.