Re: Samsung Plasma PN64D7000 Flashing Red LED No Power
So I soldered in the new capacitors. There is no change in behavior of the unit. Vs still does not come up when plugging in the television.
I also tested the capacitors I removed from the TV. They both seemed to be within specifications of 0.033 μF.
Is there anything else you recommend I try before I send the board out to PTS electronics?
Thank You.
Originally posted by tom66
View Post
I also tested the capacitors I removed from the TV. They both seemed to be within specifications of 0.033 μF.
Is there anything else you recommend I try before I send the board out to PTS electronics?
Thank You.
Comment