Samsung 32" power supply BN44-0351B no backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • seve91
    Senior Member
    • Oct 2013
    • 75
    • Italy

    #61
    Re: Samsung 32" power supply BN44-0351B no backlight

    Originally posted by dskall
    Bright white which has a bluish tint. So I would say 5700K. Others will give yellowish tint
    unfortunately 5700k is too warm, i probably need 6500k.
    As you can see in the photo, you can easily find the replaced LEDs.



    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #62
      Re: Samsung 32" power supply BN44-0351B no backlight

      They look yellow to me. Look at color temp charts. Higher temps are bluer lower temps are yellow
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • seve91
        Senior Member
        • Oct 2013
        • 75
        • Italy

        #63
        Re: Samsung 32" power supply BN44-0351B no backlight

        Originally posted by R_J
        Why not try shorting PCS802S/B (e-c) if the QS801, etc. are ok the tv should turn on.
        Or try shorting QS871 e-c to see if the tv comes on
        Power on/off controls QS871, If QS871 is turned on it connects PCS802S/A to ground causing its led (in the optocoupler) to light.
        yes, shorting PCS802S/B works, backlight is on.So is the optocoupler dead?

        Comment

        • seve91
          Senior Member
          • Oct 2013
          • 75
          • Italy

          #64
          Re: Samsung 32" power supply BN44-0351B no backlight

          Originally posted by dskall
          They look yellow to me. Look at color temp charts. Higher temps are bluer lower temps are yellow
          yes, exactly! I bought 5700k as you said, but looks like yellow.
          Just bought 6500k...hope to solve the issue.
          Anyway the power supply is now working, backlight also...maybe it was a bad soldering problem in the optocoupler.

          Comment

          • diif
            Badcaps Legend
            • Feb 2014
            • 6978
            • England

            #65
            Re: Samsung 32" power supply BN44-0351B no backlight

            Where did you get the LEDs from ?
            Apart from the colour difference they also seem brighter.

            Comment

            • seve91
              Senior Member
              • Oct 2013
              • 75
              • Italy

              #66
              Re: Samsung 32" power supply BN44-0351B no backlight

              Originally posted by diif
              Where did you get the LEDs from ?
              Apart from the colour difference they also seem brighter.
              yes, exactly. Also the pinout is different. Can't find the exact model of LED installed in the backlight bar. I bought them from ebay.

              http://www.ebay.it/itm/10-pieces-OSR...53.m2749.l2649

              Now i've just bought these 6500k:
              http://www.ebay.it/itm/4x-10x-LUW-JD...53.m2749.l2649

              Comment

              • diif
                Badcaps Legend
                • Feb 2014
                • 6978
                • England

                #67
                Re: Samsung 32" power supply BN44-0351B no backlight

                I would think they are using their own LEDs in their TVs. Perhaps something like the LM561B.
                Attached Files

                Comment

                • dskall
                  Badcaps Legend
                  • Oct 2016
                  • 2905
                  • usa

                  #68
                  Re: Samsung 32" power supply BN44-0351B no backlight

                  Well again look at color chart. https://en.wikipedia.org/wiki/Color_temperature
                  Higher temps are bluer. Trouble is just because they list them as certain temp doesn't mean they are. If you get actual 5700k they will be yellow. I would contact seller and tell them you did not get right temp leds.
                  I assume no responsibility for any stupid suggestions I might post.

                  Comment

                  • seve91
                    Senior Member
                    • Oct 2013
                    • 75
                    • Italy

                    #69
                    Re: Samsung 32" power supply BN44-0351B no backlight

                    Originally posted by diif
                    I would think they are using their own LEDs in their TVs. Perhaps something like the LM561B.
                    Originally posted by dskall
                    Well again look at color chart. https://en.wikipedia.org/wiki/Color_temperature
                    Higher temps are bluer. Trouble is just because they list them as certain temp doesn't mean they are. If you get actual 5700k they will be yellow. I would contact seller and tell them you did not get right temp leds.
                    yes but almost impossible to find. Hope 6500k leds i've just bought got the right temp

                    Comment

                    • diif
                      Badcaps Legend
                      • Feb 2014
                      • 6978
                      • England

                      #70
                      Re: Samsung 32" power supply BN44-0351B no backlight

                      Originally posted by seve91
                      yes but almost impossible to find. Hope 6500k leds i've just bought got the right temp
                      Not really.
                      it.rs-online.com/web/c/display-e-optoelettronica/led-e-accessori/led-visibili/?searchTerm=LM561B

                      Not data sheet but shows a picture of the bottom of the LED not in the data sheet.
                      Attached Files
                      Last edited by diif; 09-04-2017, 01:43 PM. Reason: added datasheet

                      Comment

                      • seve91
                        Senior Member
                        • Oct 2013
                        • 75
                        • Italy

                        #71
                        Re: Samsung 32" power supply BN44-0351B no backlight

                        ok i've bought these leds, 14.62€ includes shipping. we will see if they got same temperature

                        Comment

                        • JamesPereira
                          New Member
                          • Feb 2018
                          • 1
                          • Portugal

                          #72
                          Re: Samsung 32" power supply BN44-0351B no backlight

                          I have the same problem in your model tv, i dont have backlight here is the pcs802s/b? Can you show me by picture? Thanks a lot

                          Comment

                          Related Topics

                          Collapse

                          • Tynan Dill
                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                            by Tynan Dill
                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                            Upon bringing it home and plugging it up, it showed a standby light.

                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                            Assuming...
                            11-22-2024, 01:46 PM
                          • sam_sam_sam
                            Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                            by sam_sam_sam
                            I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                            One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                            03-31-2024, 02:12 PM
                          • sam_sam_sam
                            Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                            by sam_sam_sam
                            I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                            I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                            07-01-2024, 06:34 AM
                          • cheeky2
                            Samsung BN44-00262A H37F1-9SS power supply help finding blown value components!
                            by cheeky2
                            This Samsung combined power supply and inverter was replaced a while ago from a Samsung 37inch LE37B530P7W TV. However I would like to repair this one.
                            I have replaced the Mosfets Q1820 and Q1821 ( FDPF7N50U) which were both blown and the fuse FM802S. The schematic for this power supply that is attached doesn't relate to this power supply as the driving transistors and diodes are D1830, D1831, D1832, D1833, Q1811 & Q1810 are nowhere on the schematic!
                            Does anyone know what the components for D1830, D1831, D1832, D1833, Q1811 & Q1810 should be? I ask as I did change the Mosfets...
                            06-15-2025, 05:12 AM
                          • JimBanville
                            Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                            by JimBanville
                            The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                            Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                            I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                            I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                            09-13-2023, 07:21 AM
                          • Loading...
                          • No more items.
                          Working...