Another junk pile re-visit to try board level repair.
OK I have all the voltages correct from the power board with the exception of the 12v is reading 11.2v... all are stable not fluctuating. Also noted no voltages change or fluctuate when i press power.
On the main board I have the 3.3v going to the power on and found the pull down (is working) that returns from the power switch. (when i press the switch it pulls down from 3.3v to 0.01 as it should)
SO - I am trying to follow the path to find the component or short stopping the transistor from switching on.
Hopes of a schematic?? (i confess I have posted here first because of some time constraints but i will search also)
Was hoping someone had experience with this brand or model.
The blurry main board number is 200-107-JL321XA-DH Rev-D
OK I have all the voltages correct from the power board with the exception of the 12v is reading 11.2v... all are stable not fluctuating. Also noted no voltages change or fluctuate when i press power.
On the main board I have the 3.3v going to the power on and found the pull down (is working) that returns from the power switch. (when i press the switch it pulls down from 3.3v to 0.01 as it should)
SO - I am trying to follow the path to find the component or short stopping the transistor from switching on.
Hopes of a schematic?? (i confess I have posted here first because of some time constraints but i will search also)
Was hoping someone had experience with this brand or model.
The blurry main board number is 200-107-JL321XA-DH Rev-D
Comment