Vestel 17ips12 backlight on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • promo7uk
    Member
    • Aug 2014
    • 31
    • uk
    #1

    Vestel 17ips12 backlight on

    right ive asked this before,, and answer was incorect,

    so does anyone know how to get Backlight , switched on without main board ..

    someone said before , bl on to standby and stanby 5v+ this does not work..

    plug main board in it works..

    now , when i put 5v stby to standby and 12v pin 1 to bl on,, backlights flash,,,but will not stay on,,, anyone point me in the right direction to keep backlights lit without main board,
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: Vestel 17ips12 backlight on

      It may also require the dimming command signal beside the BL-ON for the backlights to come on.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        Previous template Next

        Related Topics

        Collapse
        • hazi12
          Vestel main board 17MB140TC
          by hazi12
          Hello, board 17MB140TC, I need to change the remote control in Vestel tool box 1.1. The original is there
          Rc48xx_2D and I want to install TOSHIBA-Rc481xx, but the program says that a maximum of 9 characters can be entered. I only entered Rc481xx and the program does not accept the driver I have in the original. Does anyone know how to do this? Other Vestel codes work.
          I can send a dump....
          Today, 01:28 PM
        • robgerr
          Asus N580VN no backlight lcd. Main X580VN rev 3.0
          by robgerr
          Good morning forum. , This notebook has problems with the backlight being absent. If I shine a flashlight on the screen, i can see the image. I tried to change several LCDs but the same problem. When I disassembled it, I noticed the LVDS connector was a little burned in the backlight pins. I also found oxide in the LVDS connector on the motherboard. I replaced the LVDS cable, same defect. I replaced the LVDS connector on the motherboard, same problem. I took some measurements on the pins (I used the boardview of the X580VD).

          pin 36,37,38,39 19,40v
          pin 35 no connected
          pin...
          07-23-2024, 05:04 AM
        • Awsmessymail
          Vizio E701i-A3 backlight only and now no backlight
          by Awsmessymail
          Hello all,
          I’ve tried to repair TVs in the past with some luck. Toms repair manuals got taken down and now thats a bit harder.
          I picked this TV up hoping for a quick fix. When the TV would power on, only the backlights would come on. The owner told me they heard loud screeching before it shut off. This alone makes me want to think the main board has an issue.
          As I researched, I found the TCON/driver boards were an issue on this unit. I went in troubleshooting the TCON but found good voltages on the TCON. I followed shop jimmys guide to test the transistors and they seem okay....
          CN201 on power supply
          5 Photos
          02-13-2024, 11:04 PM
        • max789
          Samsung UE48H6410 replaced Mainboard but backlights doesnt go on
          by max789
          Hello, I have a problem with my Samsung UE48H6410SSXZG with the main board BN41-02156A and the power board BN44-00709A. Everything seemed like this, the TV could no longer be switched on, the standby LED always flashed 5x2 times. Backlight was off and no sound from TV. Also made the flashlight test and there was no picture.

          I made the following tests:
          1. Disconnected the main board from Power Board = backlight works.
          2. Connected the main board and disconnected the T-Con = backlights does not work.

          So I ordered a main board from Ebay also BN41-02156A but from...
          01-18-2024, 06:56 AM
        • DanPoka
          Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
          by DanPoka
          I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
          Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
          This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
          02-15-2025, 05:05 AM
        • Loading...
        • No more items.
        Working...