Announcement

Collapse
No announcement yet.

Sharp LC-70LE

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Sharp LC-70LE

    Hello, I want to help a friend with his tv. He has vertical lines in his Sharp aquos tv. Can someone tell me by seing the image if this could be a bad panel or else?

    thanks!
    Attached Files
    Tags: None
    #2
    Re: Sharp LC-70LE

    looks like bad panel. open it up and disconnect one side of t-con that connects to the screen. then reconnect and do the other half. if it is panel, you will have a good pic with one of the sides connected but the opposing side will give you a distorted picture.
    WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

    Comment

      #3
      Re: Sharp LC-70LE

      check your cable connections to all cards. I don't think its a panel but it depends on the history.... how did the tv get to its current state.... all of sudden, lightning/power surge, etc? my guess tcon or main board or cables between.

      Comment

        #4
        Re: Sharp LC-70LE

        Might try flexing panel and see if it changes
        I assume no responsibility for any stupid suggestions I might post.

        Comment

          #5
          Re: Sharp LC-70LE

          Thanks for your replies, I did remove one side of t-con flex at a time and I did get a good half image but it had some horizontal lines in a 6 inch portion of the screen.

          Comment

            #6
            Re: Sharp LC-70LE

            I just put good boards on one of these, it didnt turn on at all. Replaced boards only to find the asshole i got it from cracked it. You cant really tell bu looking at it when its off. So, ill sell you whatever board you think you want to try.

            Comment

              #7
              Re: Sharp LC-70LE

              it is likely you have the "standard bad panel / tab bonds". Lots of posts on this forum. The tv can likely be saved by finding out which side is bad and removing the tabs on the bad side. Read thru the thread on these types of set.

              Comment

                #8
                Re: Sharp LC-70LE

                Originally posted by budwich View Post
                The tv can likely be saved by finding out which side is bad and removing
                That sounds just like when a Sharp has a bad LCD panel driver and has code 2-5.....

                A tab bond fix, while harder, isn't a sacrifice like the shorted panel driver issue is.....

                But, with that panel driver removal procedure in another thread, the tv was working like nothing happened.
                ASRock B550 PG Velocita

                Ryzen 9 "Vermeer" 5900X

                32 GB G.Skill RipJaws V F4-3200C16D-32GVR

                Arc A770 16 GB

                eVGA Supernova G3 750W

                Western Digital Black SN850 1TB NVMe SSD

                Alienware AW3423DWF OLED




                "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

                "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

                "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

                "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

                Comment

                  #9
                  Re: Sharp LC-70LE

                  Ok , glad there is a fix for that. Can someone give me a link to find a tutorial to this fix please?

                  Comment

                  Previous template Next
                  Working...
                  X