Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lotas
    replied
    Originally posted by jorpec View Post
    I really appreciate if any member could share a dump for a TV LED Blaupunkt 39/401l, or some other brand that uses the same mainboard/panel combo, the tv is stuck in standby

    Modelo Nr: 39/401L-GB-5B-1HUHBKUP-EU
    Modelo Ref: B39A401TCUHD

    Mainboard: TP.MSD309.BTU87
    Panel: v390DK1-LS1


    Thanks in advance
    Post your original, non-working dump here, I'll take a look and see if I can fix it for you.

    Have you been looking for this dump for 5 years?
    https://www.badcaps.net/forum/troubl...53#post1325853
    Last edited by lotas; 08-27-2024, 04:18 AM.

    Leave a comment:


  • jorpec
    replied

    I really appreciate if any member could share a dump for a TV LED Blaupunkt 39/401l, or some other brand that uses the same mainboard/panel combo, the tv is stuck in standby

    Modelo Nr: 39/401L-GB-5B-1HUHBKUP-EU
    Modelo Ref: B39A401TCUHD

    Mainboard: T.MSD309.BTU87
    Panel: v390DK1-LS1


    Thanks in advance

    Leave a comment:


  • yokoono
    replied
    Originally posted by Ben198585 View Post
    Hi, anyone got panel firmware
    17Mb110
    VES500UNDC-2D-N12
    Thanks In advance
    What problem does the image have?

    Leave a comment:


  • Ben198585
    replied
    Hi, anyone got panel firmware
    17Mb110
    VES500UNDC-2D-N12
    Thanks In advance

    Leave a comment:


  • juanka730
    replied
    Hello, good vibes for everyone, I need a dump of a Toshiba 37AV52R TV, card number STA40T VTV-L4008 REV:1
    from 2008/12/18.
    If anyone can help me, I'd appreciate it, the LCD is old but still works.

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy View Post

    Good day to Everyone!

    The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA
    Place it like in the picture.
    Attached Files

    Leave a comment:


  • otoboy
    replied
    Originally posted by lotas View Post

    What is the exact marking of your chip?

    Cipul dumneavoastră nu este instalat corect.
    Good day to Everyone!

    The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA

    Leave a comment:


  • cccamgeek
    replied
    Originally posted by Ipyong tech View Post
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Dear my be you have a schort in th e12V rile ; try to find a bad cap or back converter dc/cd is that is schort

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy View Post

    We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.
    What is the exact marking of your chip?

    Cipul dumneavoastră nu este instalat corect.
    Attached Files
    Last edited by lotas; 07-31-2024, 02:08 AM.

    Leave a comment:


  • otoboy
    replied
    Originally posted by otoboy View Post

    Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance
    We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.
    Attached Files

    Leave a comment:


  • terminalscript
    replied
    Hello everyone , hope y'all doing great ,
    i'm looking for dump eeprom for Samsung UE32J5570S , Main board : BN41-02353B , thank u very much much appreciated

    Leave a comment:


  • lotas
    replied
    Yes, U502

    Leave a comment:


  • otoboy
    replied
    Originally posted by lotas View Post

    What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.
    Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy View Post
    Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

    Panel TCL LVW320CSTT E1
    What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.

    Leave a comment:


  • otoboy
    replied
    Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

    Panel TCL LVW320CSTT E1
    Attached Files

    Leave a comment:


  • Ipyong tech
    replied
    thank you.. master lotas for checking my dump... now i know that my dump is good. the problem maybe somewhere in motherboard.

    Leave a comment:


  • lotas
    replied
    Originally posted by Ipyong tech View Post
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Mainboard ?
    I don't see a problem with your dump, it's working.
    Last edited by lotas; 07-23-2024, 02:42 AM.

    Leave a comment:


  • Ipyong tech
    replied
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Attached Files

    Leave a comment:


  • kamaku
    replied
    Yes was not working, "power-up, logo and reset" .
    Finally loaded the firmware for one "ok odl 32631H-SB EL" from post https://www.badcaps.net/forum/troubl...64#post1683821 , worked only remote control is diferent and used one universal one.
    Thanks

    Leave a comment:


  • lotas
    replied
    Does not work?

    Leave a comment:

Working...
X