https://www.badcaps.net/forum/troubl...ng-ue32t5300ak
Here is a topic where I posted two working dumps, try which one should suit you.
Here is a topic where I posted two working dumps, try which one should suit you.
-
-
nothing works for me I don't understand if it's the firmware or something elseComment
-
hi lotas sorry you gave me the dump and the tv works but there is a problem the wi fi doesn't work could you see if there is something wrong with the dump you gave me? to solve thanksComment
-
I'm talking about this TV
W25Q40CL UE40MU6400Uxzt_fix.rar (62.4 KB, 4 views)​Comment
-
ok thankComment
-
Looking for working dump for a PROSCAN PLEDED4022-UK with mainboard TP.SIS231.PT851 ​with screen V390HJ5-XCPE1 or a working dump for the same screen and main board.
I have looked on the web without any success for the dump of the Proscan TV.
Any help would be appreciated. Thanks in advance.Comment
-
-
Thanks I thought as much but just thought it might save me some time taking the flash ic off and programming it.Comment
-
I have a Samsung UE65KU6099UXZG with no standby LED. Voltages on Motherboard are fine (5V, 3,3V, 1,8V). Here is the EEPROM dump. Maybe it is bad?Attached FilesComment
-
-
Here is a dump of a Samsung UE48HU7590: Board is HU8500 BN41-02257B. TV starts for 1 second with "Smart TV" logo and then turns off screen. No reboot loop. Maybe you can find here a defect in the SPI EEProm. I added the second EEProm which is behind the little black heatsink as well in the ZIP.
Attached FilesComment
-
-
Hello to everyone i am looking for firmware
Vestel 17mb170
Panel number vesq500ndp-2d-n42Comment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I...
Comment