Eeprom dump thread!

[darinyou]

Re: Eeprom dump thread!

Thankyou for sharing this info and dumps

[touita]

Re: Eeprom dump thread!

thak u

[nourchab]

Re: Eeprom dump thread!

Hisense ltdn 22w11 uk

Main Board : MSDv3212-zc01

Flash: W25Q32BV

CPU: MSD306pt-lf



FIRMWARE DOWNLOAD:
https://goo.gl/eR1gaq

[nourchab]

Re: Eeprom dump thread!

T.V56.03 All Resolution

Main Board: T.V56.03

CPU: TSUMV56RUU-Z1



FIRMWARE DOWNLOAD:

https://goo.gl/h2gFmC

[nourchab]

Re: Eeprom dump thread!

Main Board: TP.MS338.PB801

Résolution : 1920x1080



FIRMWARE DOWNLOAD:

https://goo.gl/XuMvu1

[dick_barton]

Funai LED TV 29FL553/10N

Funai LED TV 29FL553/10N
It's working! New FLASH chip helped!
Thanks a lot for sugestions! Especially diif

Below I uploaded FLASH Dump for this TV (thanks to zdzifu from elektroda.pl forum):

FUNAI 29FL553/10 (mine was 29FL553/10n)
Motherboard: T.MSD309.B95
Flash 25Q32BSI

Submitted by Folxs

[nourchab]

Re: Eeprom dump thread!

Main Board: TP.MS338.PB801

Résolution : 1366x768

Panel : LC390TU1A



FIRMWARE DOWNLOAD :

https://goo.gl/wrfYyE

[nourchab]

Re: Eeprom dump thread!

Universal LED

Main Board : T.VST59.031

CPU: TSUMV59XU-Z1



FIRMWARE DOWNLOAD:

https://goo.gl/EMFyQE

[nourchab]

Re: Eeprom dump thread!

CV338H-A32_1366x768

Résolution _1366x768



FIRMWARE DOWNLOAD :

https://goo.gl/bvYFpq

[nourchab]

Re: Eeprom dump thread!

Universal Board LED TV

Main Board :T.V56.A8

CPU : TSUMV56RUU-Z1

Tuner :R842

SPI: 25Q32



Firmware Download :

https://goo.gl/iqzkt1

[ivoh]

Re: Eeprom dump thread!

here is the eeprom dump i took from an "emerson lf501em4 a" with a broken screen. it was a windbond chip.

[ngth82]

Re: Eeprom dump thread!

EEPROM for a Vizio VO420E tv.

Main board: 3642-0732-0150(0C)

Replacement EEPROM markings:

MXIC MX
25L3206E
M2I-12G
3T871700
KT60576

[jellytot]

Toshiba 32KV501B firmware needed.

Has anyone got the update firmware archive for a Toshiba 32KV501B. It appears to have been removed from the toshiba support site?
Thanks.

[vinceroger69]

Re: Toshiba 32KV501B firmware needed.

Has anyone got the update firmware archive for a Toshiba 32KV501B. It appears to have been removed from the toshiba support site?
Thanks.

Maybe worth contacting toshiba they may send you out the firmware on a usb stick i beleive this is the number 01246 7780

[jellytot]

Re: Eeprom dump thread!

Thanks Vince. But I don't have a viable s/n though as the info plate has been damaged and i'd imagine they would look for one ?

[vinceroger69]

Re: Eeprom dump thread!

Thanks Vince. But I don't have a viable s/n though as the info plate has been damaged and i'd imagine they would look for one ?

if your sure its a firmware issue and cant find free one online maybe use these there a good company
http://www.ohmsupplies.co.uk/EEPROM-...-32KV501B-U390

[jellytot]

Re: Eeprom dump thread!

Thanks Vince. I'll keep ohms supplies as a last resort. with shipping etc it would be closer to 30e not worth it for this 32 inch. obviously a download
would be better

[vinceroger69]

Re: Eeprom dump thread!

Thanks Vince. I'll keep ohms supplies as a last resort. with shipping etc it would be closer to 30e not worth it for this 32 inch. obviously a download
would be better

whats the mainboard model number used in this set and whats the lcd panel number used in this set

[jellytot]

Re: Eeprom dump thread!

A Vestel 17mb60 v4.1 panel LTA320AP06. I would imagine this combination is used in a variety of makes ie. Nordmende NM3296M4, so it may be worth using one for a different model? I wouldn't mind a dilfferent logo or menu I think the reason it's gone from the toshiba site is because I think the service menu allows tweaking screens etc so their software was probably used on different makes

[vinceroger69]

Re: Eeprom dump thread!

A Vestel 17mb60 v4.1 panel LTA320AP06. I would imagine this combination is used in a variety of makes ie. Nordmende NM3296M4, so it may be worth using one for a different model? I wouldn't mind a dilfferent logo or menu I think the reason it's gone from the toshiba site is because I think the service menu allows tweaking screens etc so their software was probably used on different makes

i have asked on another forum im a member of ive been sent this so its up to you if you want to try it sent you a pm with the link as wont let me upload the file