Baird JO47BAIRD Main Board problem

[jczarniak]

Hi,
Got another one Baird 47" with same problem.
Standby light ON (still), TV not switching on, no reaction on remote / side buttons.
Power supply looks alright, must be the main board.
Main board CV109H V1.2
Anyone had a similar problem?
Is there any way to fix the main board?
Thank you for support.

[Hamie]

Re: Baird JO47BAIRD Main Board problem

When you say power supply looks OK?
Is it OK? Have you checked the output voltages?

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

When you say power supply looks OK?
Is it OK? Have you checked the output voltages?

Yes, I did.
Voltages looks alright.

[Hamie]

Re: Baird JO47BAIRD Main Board problem

Still got standby light?

[dick_barton]

Re: Baird JO47BAIRD Main Board problem

Looks as though this set may have problems with EEPROM corruption
http://www.tv.quuq.org/forum/index.p...29235#msg29235

http://www.ohmsupplies.co.uk/epages/...s/E2P066-CP098

[Hamie]

Re: Baird JO47BAIRD Main Board problem

Sorry reread the op.

My thoughts would be eeprom.

[vinceroger69]

Re: Baird JO47BAIRD Main Board problem

does this set use one or two psu s im sure i have worked on one and it had two psu s in it.

Edit it was a Baird X47DTV i worked on so diffrent set

as above my guess mainboard issue so if a eeprom is cheap enough certainly worth a try if not look on ebay for a mainboard as long as it matches your panel you should be fine as i some times find replacement boards are cheaper than a new programmed eeprom (you can always take a copy of the working eeprom and maybe try re programming your old board and have a spare)

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

Sorry reread the op.

My thoughts would be eeprom.

That makes sense.
Thank you.

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

does this set use one or two psu s im sure i have worked on one and it had two psu s in it.

One power supply in this set.

[vinceroger69]

Re: Baird JO47BAIRD Main Board problem

One power supply in this set.

Yes sorry i edited my above post i just looked at my notes i made and was a diffrent model number.

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

Still got standby light?

Standby light is on, that's correct.

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

Yes sorry i edited my above post i just looked at my notes i made and was a diffrent model number.

No problem.
Thank you.

[jczarniak]

Re: Baird JO47BAIRD Main Board problem

TV back in action after replacing the main board.
Second hand main board on eBay was cheaper then eeprom.
Thank you for your support guys.
Regards.