Hello and thank you for helping.Let me break down the story best i can.I received an old Vizio plasma 50 inch tv (p50hdtv10a) 2007.It worked fine only issue was that it would solarize after 45 mins with a fan behind it and 24 mins with out a fan.I worked on computers for many years so i figured okay maybe its dusty or heatsink needs a fresh shot of paste.I looked up online to check what the problem could be.If it had solarization with menu screen selected also being distorted its two things.The control board or main video board.I took it all apart and found the control board or tcon board.I noticed it had no heat sink.I tried mounting one on with yarn.When i assembled everything i got no picture.
The following things happend. I reconnected the ribbon cables and power cables.Tv makes that click sound and now i got a soft glow picture but with no on screen display but would make a faint flash like glow when selecting inputs.I checked all my connections again and noticed the Tcon board has an led code.The code D2(off) D3(on) D4(on) and D5(on).I unplugged everything this time.It did it again ,same faint glow.I tested audio and audio would play but then cut out.My brother who is better in electronics told me it seems like something is shorting out.Something is preventing the signal.I then came to realize i had connected the LVDS cable wrong.So i flipped it around but now the tv doesnt make that click sound when i plug the ac cord.I look at the front of my tv and in the bottom right where its normally amber and then green when on is just a solid green.
Anyone know if i boned my set beyond repair.I hate the fact i finally found out i just needed a t-con board and thats it.It pretty much worked before i decided to take shit apart.
The following things happend. I reconnected the ribbon cables and power cables.Tv makes that click sound and now i got a soft glow picture but with no on screen display but would make a faint flash like glow when selecting inputs.I checked all my connections again and noticed the Tcon board has an led code.The code D2(off) D3(on) D4(on) and D5(on).I unplugged everything this time.It did it again ,same faint glow.I tested audio and audio would play but then cut out.My brother who is better in electronics told me it seems like something is shorting out.Something is preventing the signal.I then came to realize i had connected the LVDS cable wrong.So i flipped it around but now the tv doesnt make that click sound when i plug the ac cord.I look at the front of my tv and in the bottom right where its normally amber and then green when on is just a solid green.
Anyone know if i boned my set beyond repair.I hate the fact i finally found out i just needed a t-con board and thats it.It pretty much worked before i decided to take shit apart.
Comment