hi all.. i have a lg 60pz950 plasma and just recently i noticed some intermittent issues with the display im getting a pinkish/green fuzzyness ? comes and go depending on image. Any idea of what the cause could be?
60PZ950 Color issue
Collapse
X
-
Re: 60PZ950 Color issue
Be careful adjusting the voltages with the small potmeter. It can destroy the board and even the panel.
Just measure them first and see if they match with the sticker on the panel/service manual. If they match then its probably a board or even panel failure....I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: 60PZ950 Color issue
Also mark the side of the controls with felt tip pen so you know where the were originally. This could be your Vsus board, there are 4 white controls on the lower part of the board, they are also labeled for what they adjust. there are also test points marked for where you measure the voltage, some are measured with reference to ground and some like the VY have 2 test points on the board (in this picture, below the top heatsink and to the left are 2 test points marked "VY"
There are usually 2 adjustments marke "set up" and "set down" that you normally adjust with a scope (they adjust a waveform so a meter won't help)
they can be adjusted by looking at the speckels in the light or dark areas of the picture.Last edited by R_J; 08-06-2016, 10:27 AM.Comment
-
Re: 60PZ950 Color issue
Good work thanks for the updatePlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 60PZ950 Color issue
Can it More ?Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 60PZ950 Color issue
It is possible to damage the panel by having long-term high voltages, but it would be a thing that happened over the course of weeks or months. Boards could fail immediately but usually they are designed to operate correctly over the full range.,
I noticed running very high voltages on the Kuro I sold you that I got maldischarge that didn't go away for a few days afterwards (even after turning all the voltages back to the sticker), thought I might have broken it!Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: 60PZ950 Color issue
It is possible to damage the panel by having long-term high voltages, but it would be a thing that happened over the course of weeks or months. Boards could fail immediately but usually they are designed to operate correctly over the full range.,
I noticed running very high voltages on the Kuro I sold you that I got maldischarge that didn't go away for a few days afterwards (even after turning all the voltages back to the sticker), thought I might have broken it!Yes thats true Ive had a play with some sammys setting everything to max causes the panel to be locked white with alot of red and wow does it buzz lol
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
Related Topics
Collapse
-
by fixme2024Hello everyone, I have an HP DV6 DAOLX6MB6F2 REV: F motherboard. The issue I'm facing is that sometimes the motherboard doesn't turn on. I've checked the voltages for the power on button panel, and they seem to be okay. Right now, it's working perfectly fine, so I can't pinpoint the exact problem. I have the HP DV6-DV7 Quanta LX6_7 (Liverpool) DAOLX6MB6F2 Rev 1A.pdf schematics, a multimeter, and a 5A power supply. If anyone could guide me on where to start checking first, I would greatly appreciate it. This is my first experience with this. Thank you.
Here, I have attached a document...1 Photo02-14-2024, 09:24 PM -
by InstafixxNamaste,
We have a Macbook Air A2337 that came in for repair , it was drawing 5v with 0.00 -0.01 amps. Went through a couple of guides and figured that it was a DFU issue. Revived the Macbook and it then worked like a charm for 15 days.
Now it has developed a new problem i.e Intermittent Backlight Failure. Suddenly the Backlight fails and screen goes blank but the laptop is on (checked by playing Music - the laptop screen is blank but the music control respond). Once we close the lid and open it back again, the screen is back on as it was.
The issue happens very... -
This specification for the HP EliteBook 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support boardview and 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional...09-06-2024, 08:23 AM
-
This specification for the HP EliteBook 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support boardview and 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional...09-06-2024, 08:23 AM
-
This specification for the HP EliteBook 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support boardview and 840 G5 + Color LaserJet Pro MFP M477fdw + 3 year NBD HW Support schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional...09-06-2024, 08:23 AM
- Loading...
- No more items.
Comment