Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

[Hamie]

Wow these tvs are utter garbage! its like they are allergic to metal nowadays.

anyway, got one of these for nothing so cant complain, fault stuck in standby caused by the usual mainboard flash UF11 IC.

tried to freeze spray it, no response.

found someone selling a preprogrammed one on ebay, checked the model etc and looked like it would work.

got the IC and its for the wrong screen, my screen was 32H2 and the one purchased was for 32H2HD

Couldnt find anyone selling the one for my screen, so decided to freeze the existing chip copy the data, and rewrite it. really didnt expect it to work as it was unresponsive when in the set.

anyway it worked. so heres the dump for both screen types as ive copied the one i got from ebay.


PLEASE NOTE: this is not a USB file; you will need a EPROM PROGRAMMER!

[Hamie]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

32h2

[vinceroger69]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

Wow these tvs are utter garbage! its like they are allergic to metal nowadays.

anyway, got one of these for nothing so cant complain, fault stuck in standby caused by the usual mainboard flash UF11 IC.

tried to freeze spray it, no response.

found someone selling a preprogrammed one on ebay, checked the model etc and looked like it would work.

got the IC and its for the wrong screen, my screen was 32H2 and the one purchased was for 32H2HD

Couldnt find anyone selling the one for my screen, so decided to freeze the existing chip copy the data, and rewrite it. really didnt expect it to work as it was unresponsive when in the set.

anyway it worked. so heres the dump for both screen types as ive copied the one i got from ebay.


PLEASE NOTE: this is not a USB file; you will need a EPROM PROGRAMMER!

No files attached? But thanks in advance as im sure this will help a lot of people.

[Hamie]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

32h2hd

[Hamie]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

No files attached? But thanks in advance as im sure this will help a lot of people.

you replied too fast!

[ReeceyBurger123]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

Got images of the hunk of shit buddy, guessing all in one pcb ? Also cheers for files but what panels are they for ?

[ReeceyBurger123]

Re: Blaupunkt 32/147i & e-motion 32/147i - stuck in standby - repair

Same set here uses Samsung 320AN02 panel, fault in standby. First attempt of freezing Ic failed so gave it a huge blast and the set come on. Kindly UMC provide the FW upgrade for these on their site so downloaded that and updated the set. Works good