Sharp lc46le811e one flash on inverted v

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • comptek
    Badcaps Veteran
    • Aug 2013
    • 606
    • uk

    #1

    Sharp lc46le811e one flash on inverted v

    Hi guys i have a LC46LE811E and its got the single flash on the inverted v in the middle of the bezel. eg flash.......flash.......flash......flash etc

    i can force it on by (-VOL) (+CHAN) + POWER tv works fine watch tv, tune change inputs etc turn off with remote turn back on no problem, unplug tv and back to flash.......flash......flash.....

    i have done it once but for the life of me i cant get the "K" back up it has the touch panel not proper switches, what am i missing out or how long do i have to keep buttons down for ?

    i have also tried menu "9,9,9,2,2,2" but all it does is change channels

    any advise will be great

    Gary
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales

    #2
    Re: Sharp lc46le811e one flash on inverted v

    Can you post some sharp photo's of the power supply and of the connectors with legends along side.
    Willing to help but I'm no expert.

    Comment

    • comptek
      Badcaps Veteran
      • Aug 2013
      • 606
      • uk

      #3
      Re: Sharp lc46le811e one flash on inverted v

      Originally posted by dick_barton
      Can you post some sharp photo's of the power supply and of the connectors with legends along side.
      Here You Are Dick
      Attached Files

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: Sharp lc46le811e one flash on inverted v

        Checked the service manual mate ? Also think one flash means backlight lamp failure.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • budwich
          Badcaps Legend
          • Jul 2015
          • 3097
          • Canada

          #5
          Re: Sharp lc46le811e one flash on inverted v

          you need to get into the service menu and reset the lamp error counter. How are you powering up during the sequence?
          Last edited by budwich; 04-13-2016, 07:51 AM.

          Comment

          • dick_barton
            Badcaps Legend
            • Aug 2015
            • 6642
            • Wales

            #6
            Re: Sharp lc46le811e one flash on inverted v

            Recently someone said that the one of the pins on the pot had become detached and with soldering it back into place brought the Leds back on. Can't remember the model but I see there a pot alongside the Led connector in your photo.
            Willing to help but I'm no expert.

            Comment

            • comptek
              Badcaps Veteran
              • Aug 2013
              • 606
              • uk

              #7
              Re: Sharp lc46le811e one flash on inverted v

              Originally posted by ReeceyBurger123
              Checked the service manual mate ? Also think one flash means backlight lamp failure.
              im thinking along those lines too mate but i can see any dark patches yet wanna get to screen test to check

              Comment

              • comptek
                Badcaps Veteran
                • Aug 2013
                • 606
                • uk

                #8
                Re: Sharp lc46le811e one flash on inverted v

                Originally posted by budwich
                you need to get into the service menu and reset the lamp error counter. How are you powering up during the sequence?
                -VOL +chan and pwr

                Comment

                • comptek
                  Badcaps Veteran
                  • Aug 2013
                  • 606
                  • uk

                  #9
                  Re: Sharp lc46le811e one flash on inverted v

                  Originally posted by dick_barton
                  Recently someone said that the one of the pins on the pot had become detached and with soldering it back into place brought the Leds back on. Can't remember the model but I see there a pot alongside the Led connector in your photo.
                  i will check that area again and report back thanks

                  Comment

                  • budwich
                    Badcaps Legend
                    • Jul 2015
                    • 3097
                    • Canada

                    #10
                    Re: Sharp lc46le811e one flash on inverted v

                    Originally posted by comptek
                    -VOL +chan and pwr
                    I don't think that powering sequence is correct IF you are using the power button.

                    Comment

                    • comptek
                      Badcaps Veteran
                      • Aug 2013
                      • 606
                      • uk

                      #11
                      Re: Sharp lc46le811e one flash on inverted v

                      Originally posted by budwich
                      I don't think that powering sequence is correct IF you are using the power button.
                      ACTION The unit has detected a lamp error.

                      You can bypass the lamp error by entering the following sequence:

                       When the pyramid icon is flashing, hold down the VOL- and CH+ keys on the front touchpad.

                       Whilst holding down the keys, press the POWER ON key on the front touchpad.

                      The unit will bypass the error and the working lamps will switch on. You can then see in the panel where the fault is located.

                      Comment

                      • budwich
                        Badcaps Legend
                        • Jul 2015
                        • 3097
                        • Canada

                        #12
                        Re: Sharp lc46le811e one flash on inverted v

                        yes that is the sequence for bypassing the error condition / counter. You then visually look at the set to try and "spot" a bad "lamp"... but you need the sequence to get into the service menu to reset the counter.

                        Comment

                        • comptek
                          Badcaps Veteran
                          • Aug 2013
                          • 606
                          • uk

                          #13
                          Re: Sharp lc46le811e one flash on inverted v

                          Originally posted by budwich
                          yes that is the sequence for bypassing the error condition / counter. You then visually look at the set to try and "spot" a bad "lamp"... but you need the sequence to get into the service menu to reset the counter.
                          yes i have looked and there are no visable patches,
                          and the problem im facing is to get the "K" up for sevice mode im holding -vol and input and its not doing anything

                          Comment

                          • comptek
                            Badcaps Veteran
                            • Aug 2013
                            • 606
                            • uk

                            #14
                            Re: Sharp lc46le811e one flash on inverted v

                            Finally did it got to service mode lamp error 5
                            reset and gonna see if it clocks it up again
                            thanks guys

                            Comment

                            • budwich
                              Badcaps Legend
                              • Jul 2015
                              • 3097
                              • Canada

                              #15
                              Re: Sharp lc46le811e one flash on inverted v

                              good.... I assume now that it powers up in "normal fashion". Hopefully, the counter will not go up again. As another post indicated, perhaps you have some "marginal" hardware connections which might be an issue. Perhaps recheck connector seating. Fingers crossed.

                              Comment

                              • comptek
                                Badcaps Veteran
                                • Aug 2013
                                • 606
                                • uk

                                #16
                                Re: Sharp lc46le811e one flash on inverted v

                                Originally posted by budwich
                                good.... I assume now that it powers up in "normal fashion". Hopefully, the counter will not go up again. As another post indicated, perhaps you have some "marginal" hardware connections which might be an issue. Perhaps recheck connector seating. Fingers crossed.
                                i will i have been turning it on and off trying to see if the counter goes up

                                thanks Bud

                                Comment

                                • mr2tone
                                  New Member
                                  • May 2016
                                  • 3
                                  • United Kingdom

                                  #17
                                  Re: Sharp lc46le811e one flash on inverted v

                                  Hi, how did you get into the service menu please? I've got the exact same problem as you

                                  Comment

                                  • comptek
                                    Badcaps Veteran
                                    • Aug 2013
                                    • 606
                                    • uk

                                    #18
                                    Re: Sharp lc46le811e one flash on inverted v

                                    ACTION The unit has detected a lamp error.

                                    You can bypass the lamp error by entering the following sequence:

                                     When the pyramid icon is flashing, hold down the VOL- and CH+ keys on the front touchpad.

                                     Whilst holding down the keys, press the POWER ON key on the front touchpad.

                                    Please execute the following procedures to enter the adjustment process mode when the power supply shuts down.

                                    1) While holding down the “VOL (-)” and “INPUT” keys on the set at once, touch the power supply key on the set.

                                    Please separate the fingers from key on the set when boot-up is confirmed with lighting of a central icon etc.

                                    After a while, The letter “K” appears on the screen. This state is in Inspection mode.

                                    2) Next, hold down the “VOL (-)” and “CH ( )” keys on the set at once.

                                    Multiple lines of blue characters appearing on the screen indicate that the set is now in the adjustment Process mode.

                                    If you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.

                                    3) To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the power.

                                    (When the power is turned off with the remote controler, once unplug the AC power cord and plug it in again. In this case, wait for 10 seconds or so after unplugging.)

                                    Comment

                                    • mr2tone
                                      New Member
                                      • May 2016
                                      • 3
                                      • United Kingdom

                                      #19
                                      Re: Sharp lc46le811e one flash on inverted v

                                      Doesn't work because I need to unplug the set in order for the “VOL (-)” and “INPUT” sequence to work, but as soon as I plug the set back in the central icon starts flashing again

                                      Comment

                                      • comptek
                                        Badcaps Veteran
                                        • Aug 2013
                                        • 606
                                        • uk

                                        #20
                                        Re: Sharp lc46le811e one flash on inverted v

                                        with it plugged in and flashing hold the power button (touchpad on the front) light should go out after a while then do vol- and input

                                        Comment

                                        Related Topics

                                        Collapse

                                        • corrize
                                          Nikon D800 camera - flash don’t work and capacitor don’t charge
                                          by corrize
                                          Hello, I'm stuck in troubleshooting…
                                          The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

                                          In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
                                          When I press the flash button, it's detected by the system, flash icon appear on LDC display....
                                          10-01-2022, 10:02 AM
                                        • sam_sam_sam
                                          Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
                                          by sam_sam_sam
                                          This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

                                          I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

                                          I am comparing them to a brand new one that I installed

                                          The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

                                          I going to let it run for several days before I remount back on the wall next to the...
                                          09-05-2024, 06:48 PM
                                        • yucel-yucel
                                          Sharp LC-39LE652V Nand Flash
                                          by yucel-yucel
                                          Sharp LC-39LE652V model device could not be opened due to nand software error, we rewrote the nand software and it worked. But we were able to find the software without satellite, it does not see the internal satellite. Does this model have a working satellite version and software? Thanks in advance.

                                          Model ; Sharp LC-39LE652V
                                          Panel ; V390HK1-LE6
                                          Mainboard ; QPWBXG135WJZZ
                                          04-06-2023, 04:57 AM
                                        • Document Archive
                                          HP ProDesk 600 G5 + APC Back-UPS 700VA ProDesk 600 i7-9700 Specification for Upgrade or Repair
                                          by Document Archive
                                          This specification for the HP ProDesk 600 G5 + APC Back-UPS 700VA can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + APC Back-UPS 700VA boardview and ProDesk 600 G5 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
                                          09-12-2024, 02:30 PM
                                        • Document Archive
                                          HP ProDesk 600 G5 + APC Back-UPS 700VA ProDesk 600 i5-9500 Specification for Upgrade or Repair
                                          by Document Archive
                                          This specification for the HP ProDesk 600 G5 + APC Back-UPS 700VA can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + APC Back-UPS 700VA boardview and ProDesk 600 G5 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
                                          09-12-2024, 02:30 PM
                                        • Loading...
                                        • No more items.
                                        Working...