No sound, no video, no clicking. One red LED on main board. No reaction to ON button from remote. It's like it's ON as long as 120 volts is applied to the set. I have all the proper voltages everywhere i.e. 5.2, 17, VS=204.5, VA= 55. I have proper voltage to both sustain boards. C802 on SMPS is not bulging nor deformed, but it is Black in color. I have ordered a replacement for C802.
-
-
Re: Lg 50pa4500
When I disconnected LVDS and jumped EXT AUTO GEN, I got the correct red, green, blue, horiz and vert test patterns. I take this to mean the main board is the cause of the malady here?Attached Files -
-
Re: Lg 50pa4500
Yes motherboard fault.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Lg 50pa4500
Thanks Reecey! Too bad it's made out of Unobtainium!Comment
-
Re: Lg 50pa4500
Well after a week of looking for a main board..I gave up and sent mine in to PTS Electronics..$150..EBT61875108..made out of the element Unobtainium!
Aaaargh!
Comment
-
Re: Lg 50pa4500
would be interesting to take a good look at the board and see what got replaced etc when you get it back.Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Lg 50pa4500
Probably reflowed it or reballed it god knows.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Lg 50pa4500
I will check it out..it would communicate with the digital board but would not drive the smpsComment
-
Re: Lg 50pa4500
PTS Electronics has replaced some ICs and other components and did not like the way the HDMI ports were tracking, so now it is at the BGA machine..Comment
Comment