Announcement

Collapse
No announcement yet.

(SOLVED) Sanyo DP32642 - Takes a while to turn on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    (SOLVED) Sanyo DP32642 - Takes a while to turn on

    Solution: Replace the Main Board

    Someone gave me this one to try my hand out at fixing. When you hit the power button, it would take between 30 seconds and 5 minutes to turn on. Once it was on, it was fine.

    I initially replaced the power board...no good, issue persisted. Replacing the Main Board solved the problem, but now I'm wondering what on the original main board is failing?

    I tried heating up certain spots on the board, even tried cooling the same spots the next day....nothing. Anyone have any ideas?

    Great learning experience.

    #2
    Re: (SOLVED) Sanyo DP32642 - Takes a while to turn on

    Probably a bad voltage reg or Bga solder, have you an image of the old board ?
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment


      #3
      Re: (SOLVED) Sanyo DP32642 - Takes a while to turn on

      I don't have one handy right now but here's the board being sold on ebay:

      http://www.ebay.com/itm/1LG4B10Y1120...0AAOSwQTVWCtOi

      Comment

      Working...