Solarized Pic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ltank
    Badcaps Veteran
    • Jun 2013
    • 776
    • USA
    #1

    Solarized Pic

    I know that a Solarized picture is the T-con board. My question is that, if the TV T-con is built into the panel there is no fixing it. I hate to spend money on a main board and it not be the problem. The ribbon cable goes directly from the M.B. to a small board built into the panel itself.
    I have not seen a Main board cause a solarized picture on TV with a T-con.
    But o TV with no T-con, is it built into the Main board or the board made into the panel? Set is a Emerson LF5-1EM4-A
    Thanks
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Solarized Pic

      The software for them is written to the exact panel I would say change mobo or reflash the firmware which isnt easy.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • Ltank
          Badcaps Veteran
          • Jun 2013
          • 776
          • USA
          #3
          Re: Solarized Pic

          OK thanks.

            Comment

            • mmartell
              Badcaps Legend
              • Oct 2013
              • 3189
              • Canada
              #4
              Re: Solarized Pic

              I believe have seen the as15 on the driver board cannot remember which tv. Have a closer look.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Hakuu
                  LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                  by Hakuu
                  Hi There,

                  This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                  After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                  More Details

                  TV Model - LG OLED77G1PUA

                  Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                  07-12-2023, 02:37 PM
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • howardc64
                  TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                  by howardc64
                  All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                  • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                  • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                  ...
                  07-24-2025, 05:17 PM
                • Loading...
                • No more items.
                Working...