Lg 60pv250 no picture

[Shinju]

Re: Lg 60pv250 no picture

Does your phone/camera have digital macro setting?


Also something still looks off with the top half of the picture or is that just the refreash of the plasma screen vs the camera?

[Malachi]

Re: Lg 60pv250 no picture

Must just be a bad picture because there is nothing wrong except the black line.
I don't know if my iPhone 6 have a macro setting.
There is no way I can fix it and I'm not paying any one hundreds to fix it.
I'm already out almost $200 and I sold my good 50" Panasonic.

[Shaggybamboozle]

Re: Lg 60pv250 no picture

I have the same TV and had the same sound with no picture problem,
Got a replacement board and now I have a very unlit grainy picture, extremely hard to see.

Any thoughts?

Cheers!

[Shane711]

Re: Lg 60pv250 no picture

I got 2 of these TVs, both have bad Z-SUS boards and they also have broken solder connections on the Z-SUS boards. So I have ordered a bunch of parts. 250v 3a fuses with leads, FGPF4633, RF2001 or RF2001T3D, FAN73711 (Driver ICs)(2 may be needed)

Is it possible that IC 215 and IC 216 could be bad? I am not sure what they are because I do not see any markings on them. 3 legs on one side and 2 legs on the other side. I will try to get a picture sometime today.

[tw2005]

Re: Lg 60pv250 no picture

I got 2 of these TVs, both have bad Z-SUS boards and they also have broken solder connections on the Z-SUS boards. So I have ordered a bunch of parts. 250v 3a fuses with leads, FGPF4633, RF2001 or RF2001T3D, FAN73711 (Driver ICs)(2 may be needed)

Is it possible that IC 215 and IC 216 could be bad? I am not sure what they are because I do not see any markings on them. 3 legs on one side and 2 legs on the other side. I will try to get a picture sometime today.

I thought the fuse was 6.3A? I'd rip the ysus out too and reflow the coils on that one as well

[Shane711]

Re: Lg 60pv250 no picture

Yep, you was right, it is a 6.3A fuse. I just saw the 3. Because of you it has been on my mind and I just decided to look again. Good thing I already have some 6.3a fuses. I am still waiting on all the parts. My friend also had one of these TVs and I used his board to test my 2 TVs and they work perfect when I installed his Z-Sus board.

I decided I am going to fix and then part out my two 60PV250's.