Sony KDL-52NX800

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aaronwt6
    Badcaps Veteran
    • Apr 2013
    • 855
    • US

    #1

    Sony KDL-52NX800

    I have a friend coming to visit later this week from out of state. He's got an early Sonly LED Smart TV around 5 years old with the issue shown in the pictures I've attached. I didn't get a complete sets of pictures of the boards from him but just wanted some opinions on the problem. Anyone got a consensus on main, t-con, or panel? I'm thinking probably main board which is extremely expensive and almost impossible to find. The sharp t-con is also pricey but not quite as bad ($100 or so). Seems like the TV is worth spending some money on if it's appears to be fixable. Thanks in advance as always for the help!
    Attached Files
  • aaronwt6
    Badcaps Veteran
    • Apr 2013
    • 855
    • US

    #2
    Re: Sony KDL-52NX800

    Pardon the sideways pictures. Not sure what happened. They show correctly on my computer.

    Comment

    • aaronwt6
      Badcaps Veteran
      • Apr 2013
      • 855
      • US

      #3
      Re: Sony KDL-52NX800

      Any ideas on this? As you can see it uses a Sharp panel. I've never seen a TV with this T-con or main. It's somewhat of a high end TV.

      Comment

      • aaronwt6
        Badcaps Veteran
        • Apr 2013
        • 855
        • US

        #4
        Re: Sony KDL-52NX800

        Thought I'd bump this one more time in hopes that someone has seen a similar issue. He's been hanging on to the TV. Hate to tell him to trash it as I'm almost certain it's not the panel. On the other hand, I hate to have him throw money at a t-con if it may be a bad main board.

        Thanks again for any input.

        Comment

        • budwich
          Badcaps Legend
          • Jul 2015
          • 3097
          • Canada

          #5
          Re: Sony KDL-52NX800

          clean and reseat all connectors/cables.... especially between the main board and tcon.

          Comment

          • CapLeaker
            Leaking Member
            • Dec 2014
            • 8206
            • Canada

            #6
            Re: Sony KDL-52NX800

            looks like a bad panel to me. it's not tab bonds.

            Comment

            • aaronwt6
              Badcaps Veteran
              • Apr 2013
              • 855
              • US

              #7
              Re: Sony KDL-52NX800

              We did remove, clean, and reset all the cables between the t-con, main board, and panel. No change.

              Comment

              • aaronwt6
                Badcaps Veteran
                • Apr 2013
                • 855
                • US

                #8
                Re: Sony KDL-52NX800

                Originally posted by CapLeaker
                looks like a bad panel to me. it's not tab bonds.
                Thanks for the input CapLeaker. I was hoping this wasn't the case.

                Comment

                • budwich
                  Badcaps Legend
                  • Jul 2015
                  • 3097
                  • Canada

                  #9
                  Re: Sony KDL-52NX800

                  You might try heating the tcon or main board with a hair dyer and see if it changes the display at all. The regularity of the pattern would seem to indicate more of a board issue than a panel problem, imo.

                  I would suggest looking thru this
                  https://www.badcaps.net/forum/showth...vertical+lines

                  as the sticky provides good information on how to go about things. My guess is a "troubled tcon".
                  Last edited by budwich; 02-08-2016, 12:59 PM.

                  Comment

                  • aaronwt6
                    Badcaps Veteran
                    • Apr 2013
                    • 855
                    • US

                    #10
                    Re: Sony KDL-52NX800

                    Originally posted by budwich
                    You might try heating the tcon or main board with a hair dyer and see if it changes the display at all. The regularity of the pattern would seem to indicate more of a board issue than a panel problem, imo.

                    I would suggest looking thru this
                    https://www.badcaps.net/forum/showth...vertical+lines

                    as the sticky provides good information on how to go about things. My guess is a "troubled tcon".
                    Thanks. The T-con was my first guess if it's not the panel. I've repaired a heck of a lot of TVs but this issue was definitely new to me. I'm going to have him unhook each side of the T-con independently and see if the problem persists. If it does each with each side unhooked, I think it's worth a stab at a new T-con.

                    Comment

                    • aaronwt6
                      Badcaps Veteran
                      • Apr 2013
                      • 855
                      • US

                      #11
                      Re: Sony KDL-52NX800

                      Thought I'd follow up on this and let everyone know that it was indeed the T-con. The problem persisted with either side unhooked so I figured it was worth a shot. He had to order it from China and it was $110 but a damn nice TV for that price. He paid nothing up front for the set.

                      Comment

                      • CapLeaker
                        Leaking Member
                        • Dec 2014
                        • 8206
                        • Canada

                        #12
                        Re: Sony KDL-52NX800

                        you got lucky! Good fix though...

                        Comment

                        Related Topics

                        Collapse

                        • advant
                          Driving a Sharp TCON/panel with a universal main board
                          by advant
                          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                          02-03-2020, 12:25 AM
                        • Daren87
                          Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
                          by Daren87
                          Hello everyone,

                          I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                          08-13-2023, 03:25 PM
                        • thelankanguy
                          Sony KD-55X9000F TCON Issue
                          by thelankanguy
                          The TV shows a black screen with no image.
                          TCON ribbon connectors were disconnected individually for image and there was no half image even.
                          Later both ribbons were disconnected and TCON voltages were tested.
                          12V, 3.3V, 1.8V were seen present but VONE signal reads 0V.
                          There is also a short to ground in this circled inductor.
                          Is this a TCON issue or something else ?...
                          12-13-2024, 12:27 AM
                        • cheeky2
                          Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
                          by cheeky2
                          For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
                          See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
                          01-08-2024, 05:56 AM
                        • bbrain
                          Sony KD-55AG9 TCON?
                          by bbrain
                          Hi,

                          I have this problem with my Sony 55' AG9.
                          It flashes 4x.
                          I have found the service manual, and seems it is the TCON.

                          Before I buy a TCON can someone check the vid?



                          Thanks in advance!...
                          09-19-2024, 10:50 AM
                        • Loading...
                        • No more items.
                        Working...