Hi Guys, I need help finding a suitable replacement for a Varistor model# MOV-14D511K. I need to source it from here if possible http://ie.rs-online.com or another website based in Ireland. There is an exact replacement on that website but it's out of stock and i need it ASAP!!
-
-
Re: Suitable replacement MOV-14D511K
http://uk.farnell.com/bourns/mov-14d...4mm/dp/2078753
http://ie.rs-online.com/web/p/metal-...stors/9012692/
MOV-14D511K
320V R.M.S. MAX
415VDC MAX
510VDC Norm. @1mA DC
390pF
4500A peak.
14mm Dia.Last edited by budm; 12-07-2015, 05:46 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
-
Re: Suitable replacement MOV-14D511K
I updated the post. Same spec: TVZ14ECN511KBS
http://ie.rs-online.com/web/p/metal-...stors/9012692/Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Last edited by budm; 12-07-2015, 05:48 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Suitable replacement MOV-14D511K
I ordered the MOV you suggested in the previous post and it finally came today but these have 3 legs instead of 2! I'm assuming the shorter of the 3 legs is meant for thermal protection? Can i still use it and simply ignore the 3rd leg?Comment
-
Re: Suitable replacement MOV-14D511K
maybe its rs mistake? i would ring/email them to confirm if ok to use can you upload a picture of what they have sent ive looked at budms links and they look the correct ones so may just be a mistake on rs sideComment
-
Re: Suitable replacement MOV-14D511K
They have the correct model number on the packet they came in. Just had a look at the pdf here and it does show the 3 legs in it..
Lead 3 is apparently a monitor lead?Last edited by techfixit; 12-10-2015, 08:19 AM.Comment
-
Re: Suitable replacement MOV-14D511K
The one you received probably does have built-in Thermal fuse, pin 2 can be used for indicator to tell if the MOV has blown, you can use pin 1 and pin 2.
I used these 3-legs MOV in our products before.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Suitable replacement MOV-14D511K
[QUOTE=budm;614222]The one you received probably does have built-in Thermal fuse, pin 2 can be used for indicator to tell if the MOV has blown, you can use pin 1 and pin 2.
I used these 3-le
So if i just chop off the shorter 3rd lead i should be good to go yeah?Comment
-
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
I have a klipsch kda-500 that would turn on and allow me to get into the web management but it was picking up a lot of noise from audio sources so i decided to replace the smd caps on the power supply along with radial one. Some one was in here before me and they basically burned the bottom side of the traces off for the radial cap but i was able to repair it without any real problem. I thought i did a good job sourcing out replacement caps but apparently not and now i can't get the power supply to turn on it just constantly try's to keep turning on. Attached is a picture of the power supply before... -
Hello,
I am not sure where exactly to put this thread, so hopefully this is the best place.
I have a USB fan that has suddenly been unable to increase its speed. It's just stuck on the first speed. This fan has 3 speed settings. Each time you press the power button, the speed of the fan should increase.
The way the button works with each press is: Speed 1 > Speed 2 > Speed 3 > OFF
Speed 2 and 3 don't currently work any more.
I suspect the issue might be with what looks to be some kind of driver IC. It is a 16-pin... -
I mistakely pluged 100v japanese retro game console to 220v outlet.
So It seems that glass fuse and varistor have been blew up.
I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
Is there any way to identify varistor type in my sega saturn PSU?
Any reply would be appreciated.
EDIT:
It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage... -
Hello. I have Industrial Washing Machine PCB.
Customer Requested Relays Replacement.
I can't find WJ115F1 relays to buy. Looking for some help to identify possible alternative solutions.
Or any tips, on how to approach this situation.... -
My 7 channel NAD receiver has audio quality and volume issues on 2 of the channels. Sometimes they work and sometimes they don't. Sometimes they're at about half the dB level of the left channels, and then they cut out entirely. Powering off and on the receiver fixes it for a bit.
Without much experience to really know for certain, they only apparent issue I can see is with these electrolytic capacitors on the power supply. Bulging = bad, correct? I'm looking for replacements but I'm unsure what leeway I have with the temp ratings. Are there any other specifications I need to worry...
Comment