Vestel ceramic capacitor value?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jay007
    Member
    • Jul 2008
    • 15
    • UK

    #1

    Vestel ceramic capacitor value?

    Hi Badcaps

    Vestel 17IPS16-3 PSU

    I am trying to identifiy the values of the following 2 ceramic capacitors, the markings are as follows

    C924 = SL 2.2C 3KV (printed over 3 lines)
    C921 = SL 24K 3KV (printed over 3 lines)

    Now 3KV is obvious but i'm not 100% sure about the 2.2C and 24K, are they 2.2pF and 24pF

    and just to confuse things the schematics say 5n for each component which i'm guessing is 5nF

    Thanks
    Jay
    Attached Files
    Last edited by jay007; 11-22-2015, 10:08 AM. Reason: More descriptive title
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Vestel ceramic capacitor value?

    'Now 3KV is obvious but i'm not 100% sure about the 2.2C and 24K, are they 2.2pF and 24pf' That is correct, the diagram shows 3 ballast caps, your board only has two.
    Do they show leakage resistance?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • jay007
      Member
      • Jul 2008
      • 15
      • UK

      #3
      Re: Vestel ceramic capacitor value?

      The missing cap is C925 which would be on the far right of the pic inbetween the lytic and the blue CCFL connector. I was wondering if it had been accidentely left out but a search on various parts sites and ebay all show it missing.

      I was going to replace them and the transformer and see where that took me.

      Would testing for leakage resistance be done with the component out of circuit?

      Comment

      Related Topics

      Collapse

      • chth96
        Is it possible to test small ceramic disc capacitor with analogue meter?
        by chth96
        I read EBOOK of Testing Electronic Component and found that

        "In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
        Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
        It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."

        Is it really possible to test small ceramic disc capacitor with analogue...
        03-09-2024, 10:03 PM
      • NuclearSpartan
        Samsung C32HG70 - Blown Ceramic Capacitor (CP813)
        by NuclearSpartan
        Hi everyone,

        I'm new to this, so I apologize for not providing enough details. Is there anything else I need to mention? I'm trying to learn more about electronic/board repairs and hopefully fix my own.

        The only visible issue on my board is one capacitor, CP813, which appears to be labeled R 221k 2kV (possibly obsolete to B 221k 2kV now). My monitor hadn't shown any prior issues, although it is a few years old. Just before the capacitor popped, there was a high-pitched squeal for 2–3 seconds.

        I don't see any other visible damage anywhere else on the board....
        11-14-2024, 02:32 PM
      • rictechie
        smd ceramic capacitor use in iphones
        by rictechie
        is there a brand of smd ceramic capacitor use in iphones? or they are generics
        07-26-2024, 08:28 PM
      • Prolog
        RTX 3080 FE Identifying capacitor
        by Prolog
        Hi people, I hope this is the correct spot to post this, I'm new to the forum.

        I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

        I hope these photos make it clear which component I am referring to:
        (yes, the soldering is a bit botched from removing the blown one, I know)

        I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
        12-01-2024, 08:27 PM
      • Sparklingx
        SMD ceramic capacitor capacitance & voltage
        by Sparklingx
        what is the easiest way to measure the capacitance of SMD ceramic capacitors and its rated voltage?...
        09-12-2024, 01:04 AM
      • Loading...
      • No more items.
      Working...