TECH24HDLEDDVD Flashing Standby Light

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sordids999
    Badcaps Legend
    • May 2013
    • 2149
    • uk
    #1

    TECH24HDLEDDVD Flashing Standby Light

    Bought this tv tonight but stuck in standby mode just standby light flashing all voltages tested good,so searched around for a main board but as usual nothing.But searched around on google for any firmware updates and found a upgrade_loader.pkg for vestel boards 17MB82S installed this onto the usb and kept pressing OK on the remote via the IR sensor and after a few attempts it alive
    Last edited by sordids999; 11-02-2015, 06:22 PM.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: TECH24HDLEDDVD Flashing Standby Light

      Nice fix, care to share the file here? Or a link to it?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • sordids999
          Badcaps Legend
          • May 2013
          • 2149
          • uk
          #3
          Re: TECH24HDLEDDVD Flashing Standby Light

          http://www.vesteldriver.com/TV_ANASAYFA.html

          LED TV MB70 (CORE UPDATE)
          LED TV MB82 (V.0.6.6A CORE UPDATE)

          From here tom tv working fine now but i have noticed one thing the dvd drive does not work now maybe it was faulty when i bought it but thats another thing i need to work out
          Last edited by sordids999; 11-02-2015, 06:58 PM.

            Comment

            • sordids999
              Badcaps Legend
              • May 2013
              • 2149
              • uk
              #4
              Re: TECH24HDLEDDVD Flashing Standby Light

              Update::

              tv still working but it seems theres a fault still,Dvd player does not work and if you use scart lead the tv will not boot up unless its unplugged but hdmi seems fine maybe the LED TV MB82 (V.0.6.6A CORE UPDATE) is not right one for this tv

                Comment

                • sordids999
                  Badcaps Legend
                  • May 2013
                  • 2149
                  • uk
                  #5
                  Re: TECH24HDLEDDVD Flashing Standby Light

                  Just testing voltages and all caps from the PSU are low and the voltages to the DVD player are only 3 volts
                  does anyone have a idea why voltages on the power supply are so low ?

                  thanks

                  Power supply 17IPS61-3
                  Attached Files

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • 7ony
                      Samsung plasma - flashing standby light
                      by 7ony
                      The TV is a 2013 Samsung plasma, model # PN60F5300AFXZA.

                      Snagged it up in non-working condition a couple years ago. Previous owner said that sometimes he could get it to come on after repeated tries but other than that he couldn't get it to turn on.

                      Personally I haven't been able to get it to turn on at all. The standby light comes on solid when plugged in, but pressing the power button results in the standby light flashing once every 4 or so seconds. No "click" noises, no light from the panel at all. Just the flashing standby light.

                      No visible...
                      08-31-2020, 05:18 PM
                    • Bloopeta
                      Samsung UE43KU6400U Flashing Red Standby Light
                      by Bloopeta
                      Have a Samsung UE43KU6400U that will not turn on, just continuous flashing red standby light.
                      Power button does nothing

                      Have unplugged the mainboard, and backlights illuminate.
                      Have tried removing panel ribbon cables one at a time, and that makes no change.

                      With mainboard unplugged, all voltages from powerboard seem ok, but with mainboard connected, they never quite reach full voltage, and drop and raise in a constant loop (in time with click noise from mainboard.

                      Using backlight tester, I get 63.6v on both sides, so seems like no bulbs...
                      09-11-2023, 02:34 AM
                    • fuxxy
                      Samsung UN55D6000FXZA - Won't stay on, standby light flashing rapidly
                      by fuxxy
                      This is a set I posted about a few years ago. Replaced LED strips and worked fine until now.

                      Plug the set in, and it will turn on and functions with no issues.

                      After a while, (sometimes hours, sometimes minutes, sometimes immediately) the tv shuts off. When I approach the TV I notice the standby light is flashing rapidly, but the pulse of each flash is not long enough to notice from afar.

                      Other than the standby light, the unit is completely unresponsive until the power is removed and reapplied, then the cycle starts over. It does appear that the time it takes...
                      08-02-2022, 09:44 AM
                    • ChristianBr01
                      LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only
                      by ChristianBr01
                      Hello everyone,
                      I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
                      The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
                      What I already found is that the 12.8V are not an the connector to the main board connector to the power...
                      04-23-2025, 01:48 AM
                    • esqmooo
                      HP Elitebook 845 G8 dead, only caps lock flashing 7 times. Charging light always on
                      by esqmooo
                      Hello everyone.

                      This is my development machine. I've been using it since two years and half without any problem except sometimes it wouldn't wake up from sleep.
                      Lately the issue became more frequent and powering it up would take few seconds to show the POST screen.
                      Then the computer refuses to power on at all. Now only the caps lock button flashes 7 times then stops. The charging light is always on whenever a power source is connected (battery or charger).
                      I tried long pressing on the power button, after several seconds it would go off then when the button is released...
                      03-11-2025, 03:57 PM
                    • Loading...
                    • No more items.
                    Working...