lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

yes i am kind of new....im not a tv tech im just a guy who likes to tinker and i have learned from people like you etc.....but im very very novice....so ou have to bare with me

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

i have no electronics background at all....im a toolmaker by trade.....but i have repaired over 50 tvs with help from people like you....

[budwich]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

Further, have you read and digested what shopjimmy has been telling you that you MUST DO. There are specific instructions on how to reload your board. Try them... there might be a "miracle" here, if not, you have lost nothing but maybe gained some useful future knowledge.

PS. I suspect your panel IS NOT 600D3LB4N... :-)

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

i didnt buy the board from shop jimmy........but i will look and see what they say

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

hi the instructions provided by shop jimmy do not match the instructions given by sony the manufacture of the tv.....for updating firmware

but i will review ...thank you

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

if my panel is not 600D3LB4N then i would have no clue what to do since there is no other panel listed for my tv as far as compatible boards..........the original board that came with the tv matches exactly part number on white sticker the 2 replacement boards i bought though.........

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

correction 1 replacment board

[budwich]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

I don't think you understand. Shopjimmy isn't telling you that you have a 600d3lb4n panel, they are saying the card is used on a 600d3lb4n panel.... BUT that's doesn't mean it can't be used with other panels. Again, carefully read the shopjimmy information associated with your card. You will likely find your solution.

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

Power on the TV.
Insert the USB storage device containing the update file into USB port located on the side panel of the TV.
Note: The USB storage device can only be inserted into the USB port slot one way.
TV USB Ports
On the TV remote control, press the "HOME" button to open the TV Home Menu.
On the remote control, use the arrows Arrows to select the Settings icon Settings, and then press the EXECUTE Button EXECUTE Button.
Use the arrows to highlight the Setup icon Product Support Icon, and then press the EXECUTE Button EXECUTE Button.
Use the arrows to highlight "Software Update", and then press the EXECUTE Button EXECUTE Button.
Use the arrows to highlight "USB", and then press the EXECUTE Button EXECUTE Button.
A series of different messages will appear on the TV set. Please follow the on screen instructions.
During the update the PIC OFF/TIMER indicator slowly blinks amber and the STANDBY indicator is red. After several minutes, the "System update complete" message displays and the TV will automatically turn on to complete the update.
TV Indicator Lights

CAUTION: During the firmware installation process, do not remove the USB device, turn off the TV, or disconnect the TV from the power supply.
After the firmware update is finished and the TV powers on, it is safe to remove the USB device from the TV.
You may delete the update file from the USB device, or reformat the USB device.

The update process is now complete.

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

yeah i just figured that........when i get home i will review

[budwich]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

:-) ah... but I don't think you read all the GOOD information on the shopjimmy page (great resource also)

AND I QUOTE

"After changing the mainboard I had a problem, the picture and the menu for the TV were upside down. to solve it have to go into the sony service menu and change the panel model for my TV and problem solved .. thanks for the help SJ when I called."

:-) I think you may just need to find out your specific panel ID ... maybe BUT as I indicated, there may be things that get set during a "install/reload" that characterized your set for the load... if you skip that step, you may be leaving your self open to other problems.

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

thanks budwich....when i get home ill look into this

im going to look for the good information on shop jimmy not sure what you are refering to so off i look

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

i just read that...although his didnt have the solarization issue it did have the upside down issue....im more concerned with the solarization issue...we will see


thanks a lot bud )

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

lot of good info on shop jimmy success stories ...very good tip...thanks a lot budwich

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

if you look at my service menu i think it has a model identification as well as panel identification

and i think the model may say kdl-60ex645....its very hard to see but i think thats what it says

[budm]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

So the sticker on your panel is SHARP and Panel Sticker Number is JE600D3LB4N?
The on scree does look like '60ex645'

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

i dont know what my sticker says im at work however my tv is a 46 inch kdl-46ex645 tv

and the JE600D3LB4N when i researched seems to refer to a 60 inch panel...on other tvs such as vizio

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

and to me if u really just look at the overall outline of the model # in the service menu it appears to be kdl-60ex645 more than it looks like kdl-46ex645

[budm]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

It looks like the board is set for the 60" SONY.

[shelby5041]

Re: lcd sony KDL-46EX645, ...standby light is on....will not power on..no clicks..

yes it appears that way.....would that have anything to do with the solarization ??

i know the upside down issue could be from that since someone posted on shop jimmy that he changed boards and upside down screen and fixed it by changing the info in service meneu for correct model....and his model used same board mine does it was an ex645 series

but he didnt have solarzation