Vizio E470VL color bar in side of the screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jramos13
    New Member
    • Oct 2015
    • 7
    • Puerto Rico
    #1

    Vizio E470VL color bar in side of the screen

    Hi guys! Im trying to troubleshoot my vizio E470VL, i had the main board go bad once do to a power surge and i replaced with a used one i got from ebay, that was about 2 years ago, now i have this cyan/bluish/greenish bar on the side of the screen, it was going away after 1-2hours but now its not going away anymore, its more noticeable with some colors and less noticeable when something of a lighter color shows ups, i dunno if this might be the power supply board or the main board or the lcd itself, any help is greatly appreciated!
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • Jramos13
      New Member
      • Oct 2015
      • 7
      • Puerto Rico
      #2
      Re: Vizio E470VL color bar in side of the screen

      Sorry for the repkys with picstures, it does not let me upload all at once
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

        Comment

        • Jramos13
          New Member
          • Oct 2015
          • 7
          • Puerto Rico
          #3
          Re: Vizio E470VL color bar in side of the screen

          Sorry for the replies with pictures, it does not let me upload all at once
          Attached Files

          if you find these attachements useful please consider making a small donation to the site

            Comment

            • freakaftr8
              Badcaps Legend
              • Oct 2012
              • 3743
              • USA
              #4
              Re: Vizio E470VL color bar in side of the screen

              I believe that model has the main board and t-con board built into 1 unit. I'd say replace it. But before I do that try disconnecting and reconnecting all the cables to make sure you don't have a bad connection. This does not look like the panel has failed
              Did I leave the soldering iron on?

                Comment

                • CapLeaker
                  Leaking Member
                  • Dec 2014
                  • 8352
                  • Canada
                  #5
                  Re: Vizio E470VL color bar in side of the screen

                  tab bonds

                    Comment

                    • Jramos13
                      New Member
                      • Oct 2015
                      • 7
                      • Puerto Rico
                      #6
                      Re: Vizio E470VL color bar in side of the screen

                      Thanks for the replies! Yes i just tried disconnecting a reconnecting everything and nothing, so the lcd panel should be good and it should be the main board then? Is that something that canbe fix or it would need to be replaced?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • kca
                          LG 82UN8570AUD ~ TCON or PANEL?
                          by kca
                          Hello all ~

                          Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

                          When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

                          I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
                          08-31-2025, 06:38 AM
                        • ravi_1617
                          HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
                          by ravi_1617
                          Hello to all ,
                          I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
                          Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
                          on external VGA port image is perfect /normal , Attached image...
                          07-25-2025, 12:07 AM
                        • reformatt
                          Macbook Air M2 A2681 Kernel panics after screen replacement
                          by reformatt
                          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                          07-31-2025, 08:37 PM
                        • frannyjunk
                          Vizio M60-C3 left side of screen + a couple other areas dim
                          by frannyjunk
                          My Vizio M60-C3 was dead. No power, no lights. Just nothing. So I took the back cover off and noticed 4 bulging caps on the power supply board, so I replaced them (green low esr capacitors in the picture). The tv now works! But there are some areas that look dim (see picture). In particular, the left side has a dim band. I know that the led strips run horizontal, yet this band is vertical. Could it be that the led driver board is bad? Could the blown caps have taken out the led driver board? Or is this just a coincidence that every left side led on each strip just went out?...
                          11-10-2021, 08:09 PM
                        • Loading...
                        • No more items.
                        Working...