Announcement

Collapse
No announcement yet.

Panasonic TC-P46C2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Panasonic TC-P46C2

    Hello. I was just given a Panasonic TC-P46C2. When I push the power button, the RED led comes on and then goes off. it then proceeds to flash continously at a slow pace, about every 3-4 seconds. It doesnt seem to be the 10 blinks at it just keeps going although slowly. I disconnected the SN and SS boards and 3 cables to the A board with same result. Before I go any further, I was wondering if anyone has encountered this problem. Would this be a main board?

    Any suggestions is much appreciated.
    Thanks!

    #2
    Re: Panasonic TC-P46C2

    Originally posted by jstiene View Post
    Hello. I was just given a Panasonic TC-P46C2. When I push the power button, the RED led comes on and then goes off. it then proceeds to flash continously at a slow pace, about every 3-4 seconds. It doesnt seem to be the 10 blinks at it just keeps going although slowly. I disconnected the SN and SS boards and 3 cables to the A board with same result. Before I go any further, I was wondering if anyone has encountered this problem. Would this be a main board?

    Any suggestions is much appreciated.
    Thanks!
    sounds like 1 blink A-board

    Comment

    Working...
    X