Announcement

Collapse
No announcement yet.

wanted T-Con board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wanted T-Con board

    looking for a t-con board that has the gamma chip "I 7868 A" i only want the board for that IC, so if you got an old t-con about with the board pattern number of V420H1-C?? let me know if you can help,
    thanks guys.
    Last edited by finntricky; 10-20-2015, 03:25 AM.

    #2
    Re: wanted T-Con board

    Sure thats the gamma ic number ?
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment


      #3
      Re: wanted T-Con board

      is this the chip your after in this thread
      https://www.badcaps.net/forum/showthread.php?p=599170

      Comment


        #4
        Re: wanted T-Con board

        yes, it is, only get from hong kong and works out at about £6,
        all the t-cons i have here and not one has the same ic on it, been looking on ebay for a cheap t-con with same ic, found a few, looks like thats the way im gonna go unless someone on here has got something

        Comment


          #5
          Re: wanted T-Con board

          take a look at my ebay and see if i have what you need. Will give a discount for you

          http://stores.ebay.com/j-c-online-flea-market

          Also willing to trade, looking for a t con for a
          http://www.ebay.com/itm/111780249691...%3AMEBIDX%3AIT

          Comment


            #6
            Re: wanted T-Con board

            thanks fella but your in USA and im UK, the import cost are massive,
            but got a t=con coming from ebay for £6 with the correct IC on it, just gotta wait a few days before i get it

            Comment


              #7
              Re: wanted T-Con board

              No worries, i ordered the tcon i posted last night. Girlfriend on my case..wants a tv for her bedroom

              Comment


                #8
                Re: wanted T-Con board

                There is a chance that the IC in question has a ground pad soldered to the board.
                If it does it would require a heat gun to remove it and use some kapton tape over parts surrounding the IC as it will take longer to become molten than a standard as15-f.

                Comment

                Working...