Sanyo and a polaroid shadows on the screen?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 102mm
    Senior Member
    • Dec 2013
    • 181
    • us
    #1

    Sanyo and a polaroid shadows on the screen?

    I thought i had two TV's repaired until i started playing a movie on them and noticed this weird shadow on the screens. seems to be in about the same spot on both. what causes this problem?
    The Sanyo is a DP32746 but i don't have access to the Polaroid but i know there are no similar parts between the two


    Attached Files
    Craigslist Picks & Fixes

    2 ea - Samsung 52"
    Samsung 60"
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31087
      • Albion
      #2
      Re: Sanyo and a polaroid shadows on the screen?

      did you put them face-down on something that was not flat?

        Comment

        • 102mm
          Senior Member
          • Dec 2013
          • 181
          • us
          #3
          Re: Sanyo and a polaroid shadows on the screen?

          no they have been on upright the whole time.. you can still see the image on the screen in the dim area. it just looks bad..
          Craigslist Picks & Fixes

          2 ea - Samsung 52"
          Samsung 60"

            Comment

            • awyatt2
              Badcaps Veteran
              • Feb 2012
              • 407
              • america
              #4
              Re: Sanyo and a polaroid shadows on the screen?

              did you have the panel out or has it been out? thoughts are maybe something between the diffuser and panel.

                Comment

                • 102mm
                  Senior Member
                  • Dec 2013
                  • 181
                  • us
                  #5
                  Re: Sanyo and a polaroid shadows on the screen?

                  Originally posted by awyatt2
                  did you have the panel out or has it been out? thoughts are maybe something between the diffuser and panel.
                  Haven't touched the panel, they have been in storage.. I just noticed that the dark spot on the Sanyo has some image retention in that spot.. it's almost similar to the failing AS15 chip on some tcons.. but that chip is not on this tcon..
                  Craigslist Picks & Fixes

                  2 ea - Samsung 52"
                  Samsung 60"

                    Comment

                    • awyatt2
                      Badcaps Veteran
                      • Feb 2012
                      • 407
                      • america
                      #6
                      Re: Sanyo and a polaroid shadows on the screen?

                      maybe they got bumped in storage, strange they appear to be in the same spot.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • reformatt
                          Macbook Air M2 A2681 Kernel panics after screen replacement
                          by reformatt
                          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                          07-31-2025, 08:37 PM
                        • smic717394
                          iphone XS turns off when press on screen.
                          by smic717394
                          Hi,

                          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                          07-25-2024, 10:16 AM
                        • toddw65
                          Sanyo DP5834 - Gray Screen
                          by toddw65
                          Hey All,

                          I have a Sanyo DP5834 that did have an issue with the backlights, but I disassembled the unit and repaired the LED strips by resoldering all of the connectors. Now I've reassembled it and I have backlights and sound, but a grayish screen. I can tap on the screen and see that it's on, but no picture. All voltages seem to be correct on the power board.

                          Based on the LCD Flat panel TV troubleshooting guide by Bud Martin, I'm thinking the T-Con has failed because I'm getting 12v both into and out of FP1 on the T-Con. Am I on the right track?

                          Thanks,...
                          5 Photos
                          10-31-2024, 10:37 AM
                        • Chrissygizmo
                          Samsung UE55JU6800K half screen dark
                          by Chrissygizmo
                          Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                          I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                          02-10-2025, 12:33 AM
                        • Loading...
                        • No more items.
                        Working...