Samsung Un55d6000sfxza swapped main board board now showing wrong model number

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sammy76
    Member
    • Mar 2013
    • 25
    • usa

    #1

    Samsung Un55d6000sfxza swapped main board board now showing wrong model number

    OK so I got this for free off craigslist, isolated the mainboard as the problem. Checked around and saw theres several compatible replacement boards from different model #s. Ordered a mainboard originally from a Samsung 40" put it in and fired rite up.

    Seemed to be working good until I tried using the YouTube app in th hub, picture is only about 40% of the screen and cuts off. Saw the TV is listed as a un40d6050 in the TV info. How can I get the TV to recognize the correct model number? If I flash New fw will it brick the TV?
  • Shinju
    Badcaps Legend
    • Mar 2014
    • 1239
    • USA

    #2
    Re: Samsung Un55d6000sfxza swapped main board board now showing wrong model number

    Not much you can do unless you can get the panel type matching number and the right panel size config.


    You can however and this will take time and at your own risk is to go one by one with in the service menu were the option is change the panel size its to go one by one on each 55" size setting by selecting it and exiting the service menu and checking the app to see if the size goes back to normal.

    Make sure to write down your current settings before messing with that.

    Also might try a firmware update, seems odd as Samsung is usually pretty forgiving with their auto LVDS settings.

    Good luck!

    Comment

    • sammy76
      Member
      • Mar 2013
      • 25
      • usa

      #3
      Re: Samsung Un55d6000sfxza swapped main board board now showing wrong model number

      Yea its displaying th model number the board came out of so Im not sure if it would brick it updating the fw with this model file. Maybe I just wont use the YouTube app since the picture for everything else is the correct size. Would be nice to have it correctly identifying its model though in case theres an auto software update.

      I gotta say though, for only $60 its a very nice set! The guy even gave me the remote and Samsung wireless adapter with it!!

      Comment

      • Shinju
        Badcaps Legend
        • Mar 2014
        • 1239
        • USA

        #4
        Re: Samsung Un55d6000sfxza swapped main board board now showing wrong model number

        You will not brick the set, I have used mainboard a out of 32" for 55" and vice versa and never had any issues with updating firmware.

        Samsung is pretty easy going, personally I would just leave it as is and use another device for your app surfing.

        Comment

        • Ltank
          Badcaps Veteran
          • Jun 2013
          • 776
          • USA

          #5
          Re: Samsung Un55d6000sfxza swapped main board board now showing wrong model number

          Some sets give you options for different screen sizes from the service menu. Off hand I don't know for that particular set. I have done this in the past for a LG tv.

          Comment

          Related Topics

          Collapse

          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • ohren
            Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
            by ohren
            I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

            I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

            The models launched in 2018 and 2019 respectively....
            09-08-2023, 05:24 PM
          • C152Heavy
            Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
            by C152Heavy
            Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

            Summary for TL-DR readers:
            • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
            • Have obtained Samsung schematic & service documents - Can upload if helpful.
            • Have read ALL applicable threads
            • C1818 and CP820 replaced as low hanging fruit
            • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
            • VCC pin (18) of PFC...
            01-11-2023, 02:53 PM
          • Document Archive
            Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
            by Document Archive
            This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
            09-07-2024, 05:50 AM
          • Nicktronic
            Samsung Power Supply Board BN44-00874F
            by Nicktronic
            Hey everyone,

            This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

            Anybody...
            03-17-2025, 06:20 AM
          • Loading...
          • No more items.
          Working...