Main Cap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ljintexas
    LJinTexas
    • Jan 2015
    • 669
    • USA

    #1

    Main Cap

    I have a smps from a sceptre I am recapping..I cannot find a replacement 100uf 450 volt cap that is the same size as the original. Its 18mm by 32 mm.
    Am I looking in the wrong places? ? Been to mouser, digikey aliexpress.

    Thanks

    LJ
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Main Cap

    Are the dimensions critical?
    For example, could you fit one in that's a little longer, or a little wider?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30977
      • Albion

      #3
      Re: Main Cap

      rubycon BXW series?
      Attached Files
      Last edited by stj; 04-26-2015, 12:40 PM.

      Comment

      • ljintexas
        LJinTexas
        • Jan 2015
        • 669
        • USA

        #4
        Re: Main Cap

        I guess I could use one that is a little wider..kind of in a tight spot, laid down on the board.

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 30977
          • Albion

          #5
          Re: Main Cap

          that datasheet has one 18mm x 30mm

          Comment

          • ljintexas
            LJinTexas
            • Jan 2015
            • 669
            • USA

            #6
            Re: Main Cap

            I found a Nichicon...A bit pricey at $5, but the right size. Thanks

            Comment

            • ljintexas
              LJinTexas
              • Jan 2015
              • 669
              • USA

              #7
              Re: Main Cap

              replaced nine caps including main power cap. also replaced adjustable shunt regulator that looks like a small transistor.( AZ431BZAE1 )TV is working like new.

              Comment

              • Alastair E
                Chief Womble
                • Mar 2013
                • 1963
                • U.K.

                #8
                Re: Main Cap

                Cheers for letting everyone know the outcome--So many times, we hear nothing back, so dont know if any repair was successful, and what cured the problem.....
                TELEFIX

                How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
                http://www.irf.com/technical-info/appnotes/an-1088.pdf
                PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

                Comment

                Related Topics

                Collapse

                • Dani_2024
                  Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                  by Dani_2024
                  Hi and thanks in advance for any input you might provide!
                  I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                  Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                  Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                  10-28-2024, 05:06 PM
                • cheeky2
                  Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                  by cheeky2
                  I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                  Obviously the same LVDS connector for the screen connection...
                  05-25-2024, 03:27 AM
                • Asraf Atb
                  Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                  by Asraf Atb
                  Hi everyone,

                  Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                  Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                  I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                  01-27-2025, 05:02 PM
                • JSin21
                  Compatibility of main boards between different variations of samsung MU6100
                  by JSin21
                  Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

                  I have Samsung Smart TV UA65MU6100WXXY version DA01

                  Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
                  11-27-2023, 04:54 AM
                • jb_Bak
                  Sony xbr-65x900c main board issues?
                  by jb_Bak
                  Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                  Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                  Power Board Connector that goes to Main board
                  CN6401
                  Pin 01 NC
                  Pin 02 NC
                  Pin 03 "BL_ON": 0V
                  Pin 04 "N/C"
                  Pin 05 "STBY 3.3V": 3.5V
                  Pin 06 "GND": N/C
                  Pin 07 "AC_OFF"...
                  09-27-2021, 04:52 PM
                • Loading...
                • No more items.
                Working...