WHERE IS THE D BOARD? panasonic TH-42PX80U

[mattstolte]

I got the 2 blink code and i looked it up and it said 2 blink code was d board, but i dont see a d board. A d board in a panasonic is like a tcon right?

[tw2005]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

what documentation are you using? There's no D board, just A board in this, 2 blink is 15v A board SOS. Does not mean it is A board though

could be, P, A, SC, SS Board (P > A, SC, SS)

[mattstolte]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

Was sc board

[tom66]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

D board logic is inside A board for PX80 series. (PZ80, FHD1080p uses separate D board), all future Panasonic sets except some early 3D sets started integrating D board logic into the A board.

[mattstolte]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

Thanks tom, you have been alot of help to me on my learning how to repair tvs, im young and im learning this on my own. I can pretty much do all lcds except some types i have weird problems i need help with. And plasmas this tv here helped me to learn how to troubleshoot alot

[mattstolte]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

so I did the test that tw2005 supplied me with from Panasonic and it says replace sc board. so I order that hooked this one up now and I get 7 blink code so I did the test for that and it says replace sc board again, how can I get a 2 blink code and a 7 blink code and they both lead me to sc board?

[tom66]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

Look closer at the manual. 7 blinks can also be SU or SD. Did you try isolating them?

[mattstolte]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

Yes it came back sc board

[tom66]

Re: WHERE IS THE D BOARD? panasonic TH-42PX80U

You could have got a bad SC board, or you might not have installed all connectors or screws properly.