could someone post dump for tv blaupunkt TP.MSD309.BP75
please
please
-
-
Re: need dump blaupunkt TP.MSD309.BP75
Trouble is--This Sky-Media/cheap Chinese rubbish has very little support, maybe easier to find complete mainboard...TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM! -
Re: need dump blaupunkt TP.MSD309.BP75
post 8 maybe
https://www.badcaps.net/forum/showthread.php?t=42022Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
At the end I could get it.
https://dl.dropboxusercontent.com/u/...1/CVT_308B.bin
Name of archive is CVT_308B.bin
Its for 4MB epproms
This archive is for B32PW122BK TV with LC320DXN-SFR2 panel.
Now tv is working but there is a very annoying sound like reactance´s fluorescent tube.Last edited by trosdepep; 05-09-2015, 11:38 AM.Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
voila'Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
sorry , errorComment
-
Re: need dump blaupunkt TP.MSD309.BP75
I searched for a firmware for my TV, but so far cannot find it.
My TV is blaupunkt 32/122i-gb-3b2-hbkup-eu
with board tp.msd309.bp75
and LCD panel lc320dxn-sfr2 (from LG).
All the already flashed SPI or firmware I can find is for panel from Samsung LTA320A33.
Any help I can get would be welcome.
ThxComment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hi everyone,
I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.
The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.
I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....
✅ What I need:- A working 2MB BIOS dump
- Matching NM-E471 Rev. 2.0, e.g. JY575
-
Hello!
i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.
Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
...04-12-2025, 10:38 AM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
Comment