Re: Samsung UE40J5200 turns on and of in a loop
Thank you for all, now I have last update installed.
All is right but remote not works with new software, it was an old Samsung remote. I need an original remote now.
trosdepep
Senior Member
Last Activity: 03-14-2023, 08:47 AM
Joined: 07-25-2012
Location: Alicante
-
Re: Samsung UE40J5200 turns on and of in a loop
I´ve buyed new main board (50€). Now tv works fine. It comes with 1111 software but there is a new software update 1121.
Is it better to update the software or leave it as is?Leave a comment:
-
Re: Samsung UE40J5200 turns on and of in a loop
I download a firmware but how do I install it on tv, by usb? TV does not respond to anything.
Can it be updated in another way? flashing rom…
I have spi flash programmer (I ve repaired some tvs flashing eeprom)
I have found a 48 inch main board (mine is 40 inch) it has same reference (BN41-02482A) this card is right for me?...Last edited by trosdepep; 11-29-2018, 01:48 PM.Leave a comment:
-
Re: Samsung UE40J5200 turns on and of in a loop
Many thanks for your help, Im watching for it.
Any other sugerence is apreciate...Leave a comment:
-
Re: Samsung UE40J5200 turns on and of in a loop
I think too…
I dont know if it is possible solve…....Leave a comment:
-
Re: Samsung UE40J5200 turns on and of in a loop
Yes, first "Samsung Smartv" logo appears and then dtv channel selection, but remote and power buton no responds, in 20 or 30 seconds restarts on a loopLeave a comment:
-
Re: Samsung UE40J5200 turns on and of in a loop
These voltages are present on cnm803:
-----------------------------cnm803 (plugged)---------cnm803 (unplugged)
Pin 1,3,5,7 (13V)-------------------13.1V---------------------12.8V
Pin 2 (UD)---------------------------4.4V-----------------------4.3V
Pin 4 (PWM_BLU)-------------------0.5V-----------------------3.5V
Pin 6 (PW ON/OFF)-----------------6.1V-----------------------3.9V
Pin 8,9,10 (GND)
Backlight --------------------------203V----------------------175V...Last edited by trosdepep; 11-26-2018, 11:41 AM.Leave a comment:
-
Samsung UE40J5200 turns on and of in a loop
Hello Friends this is my problema with a Samsung Ue40J5200 led tv.
When I connect the plug, the TV turns on, the smartv logo appears and then the selection of the inputs but the remote control does not respond and after 10 or 20 seconds it turns off and repeats itself in a loop.
The remote control responds for a second after the smartv logo then dies.
I have tried to press the secuence mute/2/5/8/exit keys while the smartv logo appears and sometimes the screen remains black but totally blocked, so I unplug it and when reconnecting it starts the loop... -
Re: C40VB-FHTUV firmware problem (I think)
Problem solved!!!!!
I tried flash eprom with a pair of .bin roms but tv no starts. Then I tried with this [URL="https://www.badcaps.net/forum/showthread.php?t=29238"]3 files[/URL] (fifth post) and the second file was right.
Thank you at all.
RegardsRe: C40VB-FHTUV firmware problem (I think)
Problem solved!!!!!
I tried flash eprom with a pair of .bin roms but tv no starts. Then I tried with this [URL="https://www.badcaps.net/forum/showthread.php?t=29238"]3 files[/URL]Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
This is response for my petition (fw for my tv) on OKI website:
"Thank you for contacting OKI.
Regarding your request, it isn't possible to contact with the dealer who you
bought the product from?"Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
No works this idea.
With blank eeprom no leds blinking nothing happens...Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
I have and idea.
I can dump eeprom with my spiflash programer.
then erase eeprom and put it back on main board.
I remember, dont know where, not sure, if you put a blank eeprom it is automatically reprogrammated, its posible?Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
[URL="http://**************/board/"]Here[/URL] there are 26 roms (.bin files) for 17MB62-2.6 boards and any is for my tv, all tvs are 32" or smaller (mine is 40").
this is crazy
Re: C40VB-FHTUV firmware problem (I think)
[URL="http://**************/board/"]Here[/URL] there are 26 roms (.bin files) for 17MB62-2.6 boards and any is for my tv, all tvs are 32" or smaller (mine is 40").
this is crazyRe: C40VB-FHTUV firmware problem (I think)
Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)...Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
duplicatedLast edited by trosdepep; 02-03-2016, 01:33 PM.Leave a comment:
-
Re: C40VB-FHTUV firmware problem (I think)
The information that I´ve read is: copy the three archives on fat32 pendrive....
but i have four .rar archives with its 3 archives each one. there are a lot of confused information (romania, rusia....forums)
So, I try with each of them?
Im spanish and use google translator...Leave a comment:
-
C40VB-FHTUV firmware problem (I think)
I have Lcd 40" TV. Brand OKI C40VB-FHTUV.
Main board 17MB62-2.6 and PSU 17PW82-3 (Vestel both)
I think Psu is ok because all voltages are present 3.3V, 5V, 12V and 24V but all time led is blinking (no starts).
I have been looking for information on the forum and my conclusión is corrupted FW.
I need to load firmware with pendrive through the USB port but Dont know where I can download. This is the procedure I found for OKI v32b-phtuvi ([URL="https://www.youtube.com/watch?v=aFvo432AO3U"]here[/URL] see coment below):
1. Insert a USB flash... -
Re: Led tv Blaupunkt LC320DXN-SFR2 no works no standby led
Ok thank you for all help. Im tired with this tv, too much problems...
I leave the topic but I think if fw is the problem more things should fail...(i dont know)...Leave a comment:
-
Re: Led tv Blaupunkt LC320DXN-SFR2 no works no standby led
Up!
Tv works but not tune channels....Leave a comment:
-
Re: Led tv Blaupunkt LC320DXN-SFR2 no works no standby led
Any idea what kind of trouble can cause tuner dont find channels?Leave a comment:
No activity results to display
Leave a comment: