Best workbech setup for working on large TV's

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AFajitas
    Senior Member
    • Dec 2014
    • 183
    • USA
    #1

    Best workbech setup for working on large TV's

    I saw a guy on youtube had a carpeted worktop that rotated and it looked pretty cool. Right now I am using a workbench with a beach towel on top, and I don't like it. It would be nice to be able to see the TV screen while I was working on it, too. I am thinking of making a workbench with a plexiglass top so I can see through it.

    Does anyone else have any suggestions or care to share their setup?
    Tags: None
    • jose6326
      Badcaps Veteran
      • May 2013
      • 707
      • USA
      #2
      Re: Best workbech setup for working on large TV's

      The plexiglass setup sounds likeca good idea.

      I use a plastic table for the tvs that can be worked on with the stand.
      If not I have a glass table I use for the tvs I can't use the tv stand

      I was thinking of building something that is adaptable for any size tv but haven't had the time yet

        Comment

        • AFajitas
          Senior Member
          • Dec 2014
          • 183
          • USA
          #3
          Re: Best workbech setup for working on large TV's

          I thought this was a good idea as well.. http://www.casongaskinstv.com/images/tv_service.jpg

            Comment

            Previous template Next

            Related Topics

            Collapse
            • MMH3
              Dell Optiplex 5050 SFF - strange behavior and service_mode jumper not working anymore
              by MMH3
              Hello,

              i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
              Never ever i experienced problems with that.

              Now i have one 5050sff machine, where this jumper isnt working at all.
              I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?

              The history of the machine is that i used it in my office...
              03-23-2025, 09:28 PM
            • obelix24
              Macbook Air 2020 (a2179) - touch id not working
              by obelix24
              Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.

              I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID​ and after replacing UT610 it was working but here i'm not able to find anything related to...
              02-09-2025, 12:57 PM
            • hopkok
              Lenovo Legion 16ITHg6 NM-D721, keyboard not working, LEDs too
              by hopkok
              Hi masters, I need your help.

              I am working on Lenovo Legion 16ITHg6
              Motherboard number NM-D721, no BV, no schematic but I am attaching very closes ones.

              INPORTANT: My motherboard version is with IT8258 IC, that is controlling keyboard and RGB LEDs.

              My problem is on UI142, +3VALW_AG is not stable, floating from 0V to 3,3V.
              AGKB_PWR_EN_N signal is floating too (that is why+3VALW_AG not stable).
              Power LED is not working as well, power button working well.
              UI26 ??? is there any firmware too? Powered by +3VALW_AG.

              Motherboard...
              05-04-2025, 09:35 AM
            • bociub
              laptop freezes, usb 2.0 not working, usb 3.0 working
              by bociub
              Hi there,

              It is sunday and I got a faulty hp pavilion 15-cs1006na. No available schematics on the entire world. It flashed 5 long 4 short and no post then I discovered the usb 2.0 2. pin in one of the usb-a socket bent backwards and been shorted to 2. and 3. pin of the 3.0. after removing this short in the port the laptop came alive.

              Now the laptop freezing randomly. The webcam, the built in mic and according to the device manager one more thing not working which are connected to usb. If I connect anything what have usb 2.0 plug that wont work if i plug anything what...
              08-25-2024, 03:44 PM
            • someonenotyou
              Lenovo A485/T480 USB stops working when USB2.0 is plugged.
              by someonenotyou
              Hi.

              I have 2 Lenovo laptops (A485 and T480) with identical USB problem.
              When I plug in a USB 3.x device (USB storage), the USB ports are working normal.
              But as soon I plug in USB 2.0 device (mouse, USB storage), all the USB ports stop working. Even if I plug in USB 3.x device.

              The only way to get USB working again is disconnect battery and reset BIOS.

              Has anyone had anything similar?
              I have not yet tried another BIOS, but would that be the problem with USB?

              Thank you.
              03-19-2025, 12:15 PM
            • Loading...
            • No more items.
            Working...