Coaxial connector on main board broke

[phil@philporter.com]

Have an LG 60LM7200 flat screen. Somebody broke the coaxial connector off the main board. I don't think I have the expertise to de-solder and repair.
Main board number is EZX64434210-1.0. I haven't been able to find the board - does anyone know where to find one or if other boards are compatible? I've seen some that look the same, but always worried about an identical part number match.

[budm]

Re: Coaxial connector on main board broke

Did you try and contact shopjimmy?

[phil@philporter.com]

Re: Coaxial connector on main board broke

I checked their website for the part and didn't show the part number or model number.

[phil@philporter.com]

Re: Coaxial connector on main board broke

Found part # EZX64434205-1.0. Looks identical as to the ports and all connectors. Any chance it would work?

[budm]

Re: Coaxial connector on main board broke

I would send shopjimmy an E-MAIL to find out which main board is compatible with your board.

[Ltank]

Re: Coaxial connector on main board broke

Sometimes the center pin can be resoldered if the trace is not pulled. The Shield/Ground is harder because the case absorbs all the heat making it difficult to solder that would end up breaking.

[Ltank]

Re: Coaxial connector on main board broke

If you don't use the tuner the board should still work ok. Most people use HDMI inputs now.