Panasonic Inverter Transformer
I've pretty much diagnosed that I have a shorted turn output in a dual coil inverter transformer. (See post: https://www.badcaps.net/forum/showthread.php?t=41593) Panasonic 32 inch LCD.
The transformer has a code on it of A995 followed by four alpha-numeric code that seems to change when I look at spare boards on the net. I assume these suffix digits are batch codes or something similar.
Try as I might I can't locate these transformers on the net. Can anyone provide advice/guidance?
Similarly, I was wondering how specific these transformers are to the model of TV? Would a double output tranny that was used for a similar sized panel do the job?
(The cost of landing into Australia a second-hand power supply which incorporates the inverters makes it an uneconomical repair, but as always I'm loathe to junk a set that I know I could probably get going if I can get the CCFLs to stay on!)
The transformer has a code on it of A995 followed by four alpha-numeric code that seems to change when I look at spare boards on the net. I assume these suffix digits are batch codes or something similar.
Try as I might I can't locate these transformers on the net. Can anyone provide advice/guidance?
Similarly, I was wondering how specific these transformers are to the model of TV? Would a double output tranny that was used for a similar sized panel do the job?
(The cost of landing into Australia a second-hand power supply which incorporates the inverters makes it an uneconomical repair, but as always I'm loathe to junk a set that I know I could probably get going if I can get the CCFLs to stay on!)
The transformer is shorted. It blows the fuse immediately even with no load on the secondary.
Comment